Black-Ops Hellcat, Standard US/Euro Fit. 2.5 In.

Black-Ops: STANDARD-length US/Euro, LS2, SRT, Hemi, Ecotec, Volvo T6, Genesis Coupe 2.0L, Nissan GT-R, 370Z, and many more

• Available in flow-rates from 270cc to 1600cc/min (25 lbs to 150 lbs/hr) at 3 Bar.
• Order multiple injectors. - Always delivered in flow-matched sets with data sheet.
• LS2, Micro Sprint, SRT, Mini Cooper, Mercedes-Benz, BMW, etc.

Use the drop-down menu to choose your flow rate and type of connector.
Or choose no connector.

BLACK OPS fuel injectors by Fiveomotorsport, Inc.

All Black Ops listings include our CAD dimensional illustrations.

All Black Ops fuel injectors are sold in matched sets and shipped with basic tuning data. 

These calibration tables are available upon request:
FORD Calibration Data
GM HP Tuners Data
GM EF Live

Extended Latency/Offset Charts

After several years of R&D and after testing many different injector core/body configurations, Fiveomotorsport is releasing the new Black-Ops M-Series Fuel Injectors for sale to the automotive industry for street-performance, racing, and all high-performance vehicles.

• Manufactured in the USA
• ULTRA FAST RESPONSE TIMES
• CONSISTENT EVEN AT VERY LOW PULSE WIDTHS
• LOW DEAD-TIMES ACROSS THE OPERATING VOLTAGE RANGE
• COMPATIBLE WITH E85 and ALL PERFORMANCE FUELS
• STAINLESS STEEL Construction

Built with a robust internal coil design that delivers ultra-fast response time, great idle and lots of high-end power. Extremely reliable up to 95% duty cycle (note: if you are running above 90% duty cycle, it is better to move up to a higher-flowing fuel injector). Higher flow-rates available up to 1600cc/min.

Similar injectors have been used as OE injectors proving their durability and consistency -- partly due to the new larger insulated coil.
Notice the 17 mm body diameter (see photos) - approximately 2 mm larger than a standard Bosch EV14 injector.

Our custom-manufactured Black-Ops injectors bring ultra-fast minimum pulse widths never seen before in modern Bosch EV14/EV6-style high-impedance fuel injectors (Quicker than even the best low-impedance injectors).

Choose your ELECTRICAL CONNECTOR ADAPTER TYPE—included with each injector. SEE PHOTOS.

• With your order you will receive a complete flow-data-sheet showing actual tested flow rates for your individual injectors (see photos)
• Data sheet includes static flow data at 3 Bar (43.5 psi), 3.5 Bar (50.8 psi) and 4 Bar (58.0 psi). Black-Ops injectors can operate at 100+ psi.
• Data sheet includes dynamic flow data at 3 Bar at 6000 rpm and 5.0 ms and idle data at 800 rpm and 1.5 ms
• Data sheet includes full latency (dead-time) table from 8 volts to 18 volts at 3 Bar

Injector Dimensions:

Electrical connector type: USCAR
Overall length: 62 mm - 2.5 in
Body Diameter: 17 mm - 0.70 in
O-ring to o-ring, on center: 54 mm - 2.13 in
Upper o-ring diameter: 14 mm - 0.55 in
Lower o-ring diameter: 14 mm - 0.55 in
O-ring/seal material: Viton

*By special request, this injector can be delivered in the X12 configuration with o-ring to o-ring length of 59.5mm and overall length of 66.5mm.  Please make a note in the comments section when ordering.