Toyota Tacoma 2.7L, 2TRFE

INSTALL THIS FUEL INJECTOR UPGRADE IN A HIGHLY-MODIFIED, HIGH PERFORMANCE ENGINE ONLY

OEM Length - Fits: Toyota 2.7L 2TR-FE with 11.5 mm fuel rail o-rings and 16 mm intake seals

• Direct Fit - No rewiring required
• LONG NOZZLE - Mimics OE fuel injector
• Price listed is for one (1) fuel injector
• Multiple injectors ordered are delivered in flow-balanced and matched sets
• Remapping for optimized engine performance is recommended

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product. 
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85. 
The finished injectors are then flowed and inscribed with a control number. 
Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: delivered with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. 
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. 
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. 
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

Injector type: Denso-LONG NOZZLE, with internal filter

Flow Rates: 
30lb/315cc, 12-hole Nozzle - Supports up to 180 Supercharged Horsepower (assumes 91-93 octane gasoline).
36lb/380cc, 12-hole Nozzle - 220HP
42lb/450cc, 12-hole Nozzle - 265HP

Resistance: 13.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Sample Latency: 0.620 ms at 14 volts, 3 BAR
Pressure: Min. 36 PSI (2.5 bar), Max. 116 PSI (8 bar)
Surface finish:  composite plastic
Connector: Toyota 2ZZ