Standard Length Injector with Extended Nozzle

Siemens Deka
Part Number: 026U350T, 026U450T, 026U550T, 026U650T, 026U750T
High Performance
$72.95

Fuel Injector Specifications:

Injector type: Saturated
Construction: Stainless steel, Internal-filter, composite plastic
Electrical connector: Sumitomo
Overall length: 76.5 mm
Installation length: 52.0 mm
Body Diameter: 15 mm
Available Flow Rates: 350, 450, 550, 650, 750 cc/min at 3.0 BAR
Sample Latency (Dead Time): 0.476 ms at 14 volts at 3 Bar
Tested Resistance: 12.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min. 36 PSI (2.5 bar), Max. 116 PSI (8 bar)
Excellent fuel atomization - Excellent linearity
Low end pulse width accurate to within 1% down to 1.5ms.
This injector will not require more than 1% trim
All new Viton O-rings Included for installation.

More Information
Manufacturer Siemens Deka
OEM or Aftermarket High Performance
Part Number 026U350T, 026U450T, 026U550T, 026U650T, 026U750T
Year(s) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Make BMW, CADILLAC, CHEVROLET, CHRYSLER, DODGE, FORD, GMC, JAGUAR, JEEP, LINCOLN, PONTIAC, RAM, VOLVO
Model BEETLE, GOLF, JETTA, RABBIT
Engine 2.5, L5, 2.5L, BGP, GAS, 2.5, L5, 2.5L, BGQ, GAS, 2.5, L5, 2.5L, BPR, GAS, 2.5, L5, 2.5L, BPS, GAS, 2.5, L5, 2.5L, CBTA, GAS, 2.5, L5, 2.5L, CBUA, GAS, L5 2.5L 151CID, S, L5, 2.5L, CBTA, GAS, S, L5, 2.5L, CBUA, GAS, L5, 2.5L, BPR, GAS, L5, 2.5L, BPS, GAS, S, L5, 2.5L, BPR, GAS, S, L5, 2.5L, BPS, GAS, SE, L5, 2.5L, BPR, GAS, SE, L5, 2.5L, BPS, GAS, SE, L5, 2.5L, CBTA, GAS, SE, L5, 2.5L, CBUA, GAS, SEL, L5, 2.5L, CBTA, GAS, SEL, L5, 2.5L, CBUA, GAS, WOLFSBURG EDITION, L5, 2.5L, BGQ, GAS
Write Your Own Review
You're reviewing:Standard Length Injector with Extended Nozzle