Bosch; Polaris, Sportsman, Scrambler; XP1000, XP850, 850 SP; VICTORY Motorcycles

• Polaris Sportsman, Scrambler; XP 850, 850 SP
  
  
• VICTORY motorcycles
  
  
• Available Flow Rates: 360cc, 440cc, 490cc, 600cc, 750cc, 1000cc, 1200cc
  
  
• FLOW MATCHED PAIRS - NEW
  
  

STOCK HORSEPOWER & FLOW RATES: 90 HP, 952cc engine - approximately 320cc/min; 78 HP, 850cc engine - approximately 270cc/min

LIST PRICE INCLUDES: 1 Pair (two) FUEL INJECTORS 

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintenance, but not essential, for stainless steel based fuel injectors.

Injector type: EV14
Flow pattern: Varied cones

Tested Flow Rates Vary:

360cc to 1200cc/min at 3 BAR

Resistance: 12.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Pressure: Min. 36 PSI (2.5 bar), Max. 145 PSI (10 bar)

Surface finish: Black composite

All Viton 14.5 mm o-rings Included for installation.