Denso 2000 cc/min, Honda, VTEC, E-85

*LIST PRICE INCLUDES A SINGLE (1) FUEL INJECTOR, AND (1) PIGTAIL ELECTRICAL CONNECTOR

2000cc, high-impedance, flow-balanced and matched "Asphalt II Series" fuel injectors custom fitted for Honda B, D and H Series or equivalent 4 cylinder engines.

THIS 2000cc INJECTOR IS COMPATIBLE WITH ALL FUEL TYPES

• OUR ASPHALT-SERIES FUEL INJECTORS ARE RATED FOR GASOLINE, OXYGENATED (MTBE, ETHER) RACING FUEL, ETHANOL, E85 AND METHANOL

FLOW CHART: Each set is sold with a complete, SET-SPECIFIC flow-data chart indicating individual dynamic and static flow rates at 3.0, 3.5, and 4.0 BAR at 15%, 50% and 100% for each injector, along with a complete dead time (latency) table. Flow matching was done with industry-standard equipment of the highest quality.

The injectors incorporate a single-hole disc w/diffuser plate fuel delivery nozzle with a wide cone spray for excellent fuel atomization.

Injector Body Design: Orange composite plastic, Stainless steel internal parts
Flow rate:
(These are true and tested flow rates of this individual set of 4 fuel injectors).
We use the industry standard Heptane as our testing agent.
Notice we give a flow range. Each set has some variation - but never more than 1.0 - 1.5 % within any one set.
2000 cc/min at 43.5 psi (3 bar)
2150 cc/min at 50 psi (3.5 bar)
2275 cc/min at 58psi (4 bar)
Sample Dead Time: 0.95 ms at 14 Volts - Complete table delivered with flow-matched sets.

Easy tuning and low-end rpm and idle.
This fuel injector will function at rail pressures in excess of 101 PSI or 7 BAR.
Excellent low pulse width with predictable response.
Excellent atomization for modern single and multi-valve engines.

Injector type: Saturated
Application: Super-street and racing, naturally- and forced-aspirated engines.
Fuel Delivery: Single-hole disc w/diffuser pllate - Excellent atomization - WATCH VIDEO.
Electrical Connector: EV6, (USCAR)
Length: 3 inches, 74 mm - with extenders
Diameter: 19 mm
Top Oring: 12 mm
Bottom seal: 16 mm
Resistance: 12.5 Ohms
Fuel types: All types of gasoline, methanol, E85, E25, E10

All our "Asphalt 2" series injectors are guaranteed flow matched.
We adhere to the latest technology and craftsmanship techniques.