GSXR600, GSXR750, Yamaha R6, Grizzly, Rhino, Apex, Kawasaki, Suzuki
Siemens/FIVEO
Part Number:
6031F: Yamaha R6; GSXR 750 GSXR 600
Flow Rate:
Please select an option below
Resistance:
12.5 Ohms
Connector Type:
Sumitomo
High Performance
$105.00 (USD)
USE FOR HIGHLY MODIFIED ENGINES:
Custom Manufactured in the U.S.A.
- IDENTICAL FIT TO OEM - Plug 'N' Play
- CONSISTENT AT VERY LOW PULSE WIDTHS
- EASY TUNING FOR A STOCK-LIKE IDLE
- ULTRA FAST RESPONSE TIMES
- VERY QUICK DEAD TIMES ACROSS THE OPERATING VOLTAGE RANGE
Guaranteed flow balanced and matched statically and dynamically to within 1.0%
- Flow rates available: 450, 550, 650 cc/min; 3 BAR
- Price listed is for a single plug 'n' play fuel injector
6031F: Kawasaki KX450, Yamaha R6, i6-599cc, ti-valves,100hp; GSXR 750 GSXR 600; GSXR600, GSXR750, Suzuiki SV1000S, Yamaha R6, Grizzly, Rhino, Apex
Fuel Delivery: Single-hole disc (for maximum fuel atomization).
Coil Resistance: 12.5 OHMS
Minimum Pulse Width: 1.0-1.7 ms
With your order you will receive a complete flow-data-sheet showing actual tested flow rates for each individual set.
Data sheet includes static flow data at 3 Bar (43.5 psi), 3.5 Bar (50.8 psi) and 4 Bar (58.0 psi).
Fiveo Asphalt injectors can operate at up to 100 psi.
Also included: Dynamic flow data at 3 Bar at 6000 rpm and 5.0 ms and idle data at 800 rpm and 1.5 ms
Full latency (dead-time/offsets) table from 8 volts to 18 volts at 3 Bar
Injector Specifications:
Electrical connector type: Sumitomo
Overall length: 48 mm - approx. 1.9 in
Body Diameter: 17 mm
O-ring to seal: 38 mm
Upper o-ring diameter: 11.5 mm - 0.45 in
Lower seal diameter: 14 mm
O-ring/seal material: Viton
Manufacturer | Siemens/FIVEO |
---|---|
OEM or Aftermarket | High Performance |
Connector Type | Sumitomo |
Flow Rate | Please select an option below |
Impedance | 12.5 Ohms |
Part Number | 6031F: Yamaha R6; GSXR 750 GSXR 600 |