Bosch-type; EV-1 Peak & Hold, US/Euro-Fit, Fuel Injectors, NEW-Flow Matched

Many Flow rate options available from 380cc up to 2000cc

Easy Installation - Plug & Play

• See menu options and photos:
• US / Euro Fit - 14.5 mm upper and lower orings

List price includes: One (1) fuel injector - Matched sets available 

Unique FLOW CHART with all matched sets: Complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

This injector will function at rail pressures in excess of 116 PSI, 8 bar.

• Excellent low pulse width response with predictable response down to 2ms.
• Excellent atomization for modern multi-valve engines
• Require no more than a 1% trim for easy tuning
• EV-1, Jetronic (Minitimer)
• Usage: Offroad and racing, naturally-aspirated and forced-induction
  
  
• ALL-New with high-performance pintles

Fuel Injector Specifications:

Type: Peak and Hold

Fuel Delivery: Single Pintle

Electrical Connector: EV1, Jetronic

Spray type: Wide cone, excellent atomization

Installation Length: 64 mm

Overall Length: 74 mm

O-rings: Viton Rubber

Resistance: 2.5 Ohms

Amperage: 4.5 amps

Fuel types: Gasoline, Methanol, E85, E25, E10, E100