LOW-RES, Asian Import FIT, Flow Rates up to 2000 cc/min

• 13 - Flow rates from 450cc up to 2000cc - Easy Installation - Plug & Play
• Asian Import Fit - 11mm upper oring and 16mm lower seal
  

List price includes: One (1) fuel injector - Matched sets available - delivered with injector test data

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product. Our injectors are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: delivered with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

E85 Fuel usage - Because of the high-H2O levels, ethanol will not rust but tends to "dry" the orifices in stainless-steel constructed fuel injectors. Customers should be aware that this can be a problem with some fuel injectors and may cause a "sticking" problem. Periodic lubrication is recommended for any engine that will be left without starting/running for extended periods - weeks to months - at a time.

• This injector will function at rail pressures in excess of 116 PSI, 8 bar.
• Excellent low pulse width response with predictable response down to 2ms.
• Excellent atomization for modern multi-valve engines
• This set will require no more than a 1% trim for easy tuning
• Injector type: EV1, Jetronic
• Application: Offroad and racing, naturally- and forced-aspirated engines

Fuel Injector Specifications:

Type: Peak and Hold

Fuel Delivery: Single Pintle

Electrical Connector: EV1, Jetronic

Spray type: Wide cone, excellent atomization

Installation Length: 64 mm

Overall Length: 74 mm

Diameter: 24 mm

O-rings: Viton Rubber

Resistance: 2.5 Ohms

Amperage: 4.5 amps

Fuel types: Gasoline, Methanol, E85, E25, E10, E100