Bosch EV-14EK; 1200cc, Evo X, VW, Audi, Mercedes, BMW

• CUSTOM MANUFACTURED, Flow-Matched sets available
• FITS: 4B11-Evo X, BMW M5, Mercedes, Audi, VW, etc.
• DYNAMICALLY AND STATICALLY BALANCED AT 1200 cc/min - 110 lbs/hr.
• BRAND NEW flow-matched, EV14 standard-length w/extended nozzle, fuel injectors.
• Includes all required o-rings/seals to properly fit your engine application

PRICE INCLUDES (1) FUEL INJECTOR
Also choose an alternate connector at additional cost.

Injector information and specifications:

Our injectors are custom-manufactured from brand new American/German/Japanese-made fuel injector "cores" in large-quantity batches to achieve the highest quality product. The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector.

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

Injector type: EV-14EK, saturated
Spray Nozzle: Single-hole disc w/diffuser plate for maximum atomization.
Flow rate:
1200 cc/min - 3.0 BAR (110 lbs/hr, 43.5 psi)
Solenoid resistance: 12.5 Ohms
Minimum Pulse Width: 1.7-1.8 ms

Dimensions:
Overall Length: 2.95 inches, 74.5 mm
O-ring to oring: 2.00 inches, 50.5 mm
Diameter: 0.60 inches, 15 mm
O-rings: Viton, top and bottom, 14.5 mm

Electrical connector type: EV-1, Jetronic