650cc/min - Toyota 1ZZ, 2ZZ, Scion, Lotus

USE FOR HIGHLY MODIFIED ENGINE ONLY.
Brand new 650cc/min custom, flow-matched Denso fuel injectors

Use for highly modified 1ZZ and 2ZZ 1.8L four-cylinder, 1UZ and 2UZ V-8 engines that incorporate a standard Denso fuel injector and 11.5mm/16mm seals.

• Listed price is for a single (1) fuel injector
• Order 4 or more injectors, and you will receive a flow-balanced, matched set

Our injectors are custom made using brand new Japanese-made fuel injector "cores" in large-quantity batches to achieve the highest quality product.
The injectors are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual dynamic and static flow rates at 3.0, 3.5, and 4.0 BAR at 15%, 50% and 100% for each injector, along with dead time (latency) at 14 volts. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

This injector is a direct-fit replacement upgrade for a modified Toyota engines - No electrical connector change needed - No resistors.

Use for super street or racing 4, 6 and 8 cylinder applications.

Brand New High Flowing, Flow-Matched Fuel Injectos

The Denso brand is a respected name in high performance and racing parts.

Flow Rates: Standard measurements taken in a controled inviornment. We use Heptane as our testing agent. (The Bosch 0280155968 is our basis fuel injector for testing).
650 cc/min at 3.0 bar
710 cc/min at 3.5 bar
780 cc/min at 4.0 bar

Latency (dead time): 0.75ms at 14 volts

Part number: 0D050650

Resistance: 11.8-14.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Amperage: 1.0 Amps

Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)

All O-rings Included for installation