*Reconditioned/Rebuilt injectors.
Barbbed w/hose can be used for racing applictions.

Resistence: 2.7 Ohms
Flow: 270cc/min (28.8lbs) open
23lbs/hr 80% duty cycle

*Reconditioned/Rebuilt injectors.
Barbbed w/hose can be used for
racing applictions.

Resistence: 2.7 Ohms
Flow: 300cc/min (32lbs) open
25.6lbs/hr 80% duty cycle

This Siemens injector is set up for stock replacement for RX7 Engines

(Use this injector in place of the Denso 195500-1350 with center alignment connector).

$302.99 per set of 4 fuel injectors/ev1 connectors

(Sold with ev1 electrical connectors).

You are purchasing a BRAND NEW set of manufacturer's

Siemens fuel injectors -

Brand New High Flowing Fuel Injector Set

The Siemens brand is a respected name in high performance and racing parts.

WE buy this Siemens and all our fuel injectors in bulk packs.

Fiveo routinely test and retest samples from each shipment for quality control.

We do not provide flow data sheets.

Flow matching is labor intensive and would add nearly $100 to the cost of this set.

Fiveomotorsport guarantees this set to be matched

and better than +/- 1-1/2% according to the manufacture'r specifications.

We have never had a blow-out or coil failure of any Siemens Deka fuel injector.

No Siemens 3102 fuel injector has ever been found to be outside of the manufacture's advertised speciftications.

Fiveo's Exclusive Guarantee:

If you ever have an injector go outside spec or fail for any reason when functioning within the manufacture's

stated operating conditions, We will replace it with a brand new fuel injector.

You are purchasing a brand new high performance Siemens fuel injector set.

Mfg., Part number: FI 11402; Part number on injector: 3102

Flow Rate: 550cc/min at 43.5 PSI

Flow Rate: 55LBS/HR at 43.5 PSI

Resistance: 2.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Amperage: Peak 4.0 Amps/ Hold 1.5 Amps

Pressure: Min. 36 PSI (2.5 bar), Max. 87 PSI (6 bar)

Surface finish: bead blasted, polished

All O-rings Included for installation.