This LS1 injector incorporates faster pulse rates and a finer more efficient spray for added power response and economy.

Brand New Set - No additional core deposit

This set is an orignial equipment, take-out replacement set. This injector sold with our best 36 Months/Unlimited Miles Warranty

This FMC fuel injector has the identical specifications as your original GM parts. No modifications need to be made to any part of your engine.

*Brand New Volvo Fuel Injectors: We have cross-matched your old part to a newer Bosch part number. You are assured of receiving a brand new Bosch fuel injector that has identical fuel flow and electrical characteristics. Volvo Turbo Injectors provided by Fiveomotorsport are sold at discounted prices.

This fuel injector is your original equipment replacement.
For Supercharger upgrades see our high performance fuel injector page.
Flow rate: 225cc/min (22#)

Stock OE Application
*All 934 are brand new, first-rate injectors sold from a bulk package.
All injectors sold with a
100% Warranty

The 0280155934 has a disc-type, single hole fuel outlet.
We also sell a Bosch 4-hole injector for the above applications. See below.

Brand new Bosch Design III Original Equipment replacement fuel injectors.

CDH-210

XF1E-21lb - 11.0-18.0ohm
Fitments: (OVAL Connect)
Explorer 5.0 V-8 FFV
2000-02 Contour 2.5 FFV
*All Fiveo brand new Bosch fuel injectors carry a 3-Year Warranty.

XW4E

Lexus 2995cc (EVZFE)

NOTE: Toyota applications:
Low mileage, takeouts - blueprinted and
hermetically sealed sets - 3Year Warranty.
IN STOCK
Ready to ship
23250-62040

23250-75050/79095
This part is in stock/Ready to ship!
NOTE: Toyota applications:
Blueprinted and
hermetically sealed Sets.

23250-0A010 (1MZFE)

F81Z9E527CRM - AD
7.3L

(Note: Only 2000-01 F-Series use the optional #8 AE injector).
XC3Z9E527AARM - AE
7.3L

The above listed Land Rover injectors are brand new.

OEM replacements for 1999 - 04, 4.0 and 4.6 V-8

Stock replacements. 3 Years/Unlimited Miles Warranty

You are puchasing a set of Bosch/Ford Motorsport fuel injectors - BRAND NEW SET
This is a replacement, upgrade injector for p/n 13641703819

Increase miles per gallon and restore lost horsepower with this Generation III Bosch fuel injector.

This set of Bosch fuel injectors is not the manufacturer's original equipment (OEM) spec injectors for this vehicle.

The Ford Motorsport 0280155710 fuel injectors have been carefully tested and cross referenced to match the internal coil resistance. The nozzle is a four-hole disc identical to the 823 injector. The fuel flow rating and flow characteristics for the 710 is identical to

the OEM fuel injectors for the M62 engine(s) listed.

You are purchasing a BRAND NEW set of manufacturer's

Bosch/Ford Motorsport 19lbs/hr fuel injectors - brand new high performance fuel injectors.

Use for stock replacement OEM original equipment

1999-03 3.5 Eight Cylinder M62 4.4, 4.6 and 4.8 engines that use the high resistance fuel injectors. See more complete listings for this fuel injector.

SPECIAL NOTE to our customers: This is a superior fuel injector for original equipment replacements for your M62 BMW engine. All orings are supplied for installation. This injector is sold with a money back guarantee. If you are not 100% satisfied we will refund your purchase price for returned injectors.

Injector Body Design: Metal and composite plastic

Flow rate: 220cc/min at 43.5 psi

Length: 3 inches, 74 mm

Diameter: 16 mm

Orings: Top and bottom, 14 mm

Resistance: 14.5 Ohms

Filterless with a 4-hole disc fuel delivery nozzle.

(All fuel injector specifications meet or exceed the manufacturer's specification standard).

Use this Bosch fuel injector to add miles per gallon in your BMW M62 V-8 engine.

Buy from a seller you can trust.

Buy from a proven ebay seller.

Fiveomotorsport has been a Power Seller on ebay since 2000.

We are fuel injector experts - email with your questions.

All injector sets are sold with the manufacturer's warranty plus our 36 Months/Unlimited Miles Warranty.

*All Fiveo Brand New injectors carry a 3Yr Warranty.
Same as all our brand new fuel injectors.

No core deposit for brand new fuel injectors
Flow-matched, blueprinted sets of 6 fuel injectors.

This is our STAGE 1 (stock engine) UPGRADE for the trucks listed below.
Purchase this 4-HOLE NOZZLE fuel injector to increase fuel atomization - resulting in more miles per gallon, a smoother throttle respose, which will restore lost horsepower.

You are puchasing a set of Ford Motorsport/Bosch Generation 3, with 4-hole disc fuel nozzle 22lbs/hr at 43.5 psi.

fuel injectors for Dodge trucks - SEE COMPLETE FIT LISTINGS BELOW

Dear Customer, This Bosch/Ford Motorsport injector is rated at 22lbs/hr at 43.5 psi. This rating is the stock rating for the V-6 and V-8 engines listed. The injector will install and be regulated by the engine management computer. This new generation injector is better designed to deliver the proper amount of fuel over any previous injectors.

Use for stock replacement OEM original equipment replacements. This Generation 3 Ford Motorsport fuel injector incorporates a 4-hole disc fuel delivery nozzle for maximum fuel atomization. Your engine will run smoother with better throttle response.

Our customers have reported more miles per gallon using Design III, EV6 fuel injectors.

Depending on driving conditions, your personal driving habits, and local fuel quality, you may notice a substantial increase in your own fuel mileage.

Injector Body Design: Black composite plastic

Flow rate: 22lbs/hr at 43.5 psi.

Electrical connector type: EV6, U.S. CAR

Length: 3 inches, 74 mm

Diameter: 19 mm

Orings: Top and bottom, 14 mm

Resistance: 14.5 Ohms

(All fuel injector specifications meet or exceed the manufacturer's specification standard).

Buy from a seller you can trust.

Buy from a proven ebay seller with over 4000 Positive Feedbacks.

Fiveomotorsport has been a Power Seller on ebay since 2000.

We are fuel injector experts - email with your questions.

All injector sets are sold with the manufacturer's warranty plus our 36 Months/Unlimited Miles Warranty.

This is the Bosch single-hole OEM fuel injector for the vehicles listed.

Will help restore lost miles per gallon in a high mileage engine.

SEE our Bosch 4-hole fuel injector alternative for even more brand new fuel injector advantages.

You are purchasing a brand new set of Nissan fuel injectors.

Original Equipment P/N:
16600-1B000/1B001
1B050/1B051

You are puchasing a set of 4 (four) Bosch EV14, Fiveomotorsport high performance,

high impedance, flow-matched "Asphalt II" fuel injectors custom fitted for S2000 or equivalent 2.0 4 cylinder engine -

Flow rated at 550cc/min at 3 BAR. See complete flow chart.

This set of EV14 Bosch injectors come complete with 4 (four) U.S. CAR to Keihin electrical connector adapters - (See photo).

This Denso fuel injector is part of our new "ASPHALT II" series of newest generation, flow matched superstreet and racing fuel injectors.

All 550cc fuel injector sets come with a flow DATA SHEET.

The injectors incorporate a single pintle fuel delivery nozzle with a wide cone spray for excellent fuel atomization.

Use for naturally aspirated and forced-air/exhaust 2.0L 4 cylinder engines.

SPECIAL NOTE to our customers: This is a flow matched set of Bosch/Fiveo fuel injectors. Viton orings and connectors are supplied for installation modified S2000 2.0L 4 cylinder engines (EV6/Keihin adapters supplied).

This injector set is sold with a money back guarantee. If you are not 100% satisfied we will exchange or refund your purchase price for returned, unused and uninstalled fuel injectors. You pay only the shipping.

Injector Body Design: Metal and composite plastic

Flow rates:

This set is flow matched to within 0.5 to 1.0%

(These are true and tested flow rates of this individual set of 4 fuel injectors).

We use the industry standard Heptane as our testing agent.

550 cc/min at 43.5 psi (3 bar)

580 cc/min at 50 psi (3.5 bar)

625 cc/min at 58psi (4 bar)

Dead Time: 0.8 ms at 14 Volts

This Denso injector will function at rail pressures in excess of 130 psi, 9 bar.

Excellent low pulse width response with predictable response down to 1 ms.

Excellent atomization for modern multi-valve engines.

Injector type: New generation EV6

Application: Super-street and racing, natually- and forced-aspirated engines.

Fuel Delivery: Single-hole, modified disc

Electrical Connector: EV6, (U.S. CAR)

Spray type: wide cone, maximum atomization

Length: 2.5 inches, 62 mm

Diameter: 19 mm

Orings: Top and bottom, Viton

Resistance: 11.8-15.5 Ohms (12.5)

Fuel types: All type gasoline, Methanol, E85, E25, E10

4 Wired, two ended electrical connector adapters, included.

Buy from a proven ebay seller.

Fiveomotorsport has been a Power Seller on ebay since 2000 with over 4100 Positive Feedbacks.

We are fuel injector experts - email with your questions.

All injector sets are sold with our 36 Months/Unlimited Miles Warranty.

You are purchasing a BRAND NEW set of manufacturer's

Denso/Toyota 4 cylinder engine - 4 brand new fuel injectors.

Fit most modern Toyota engines. Will fit many other imports but you may need to purchase a set of Toyota electrical connector pigtails sold separtately in our store for under $30.

Fitment: Import - Use for naturally aspirated and turbo charged engines with 400-450 horsepower

Fuel Injectors Specifications:

Injector type: Denso, saturated

Body Design: Composite plastic

Connector type: Toyota

Tested flow rates:

3 bar (43.5psi): 820cc/min

3.5 bar (50psi): 880cc/min

4 bar (58psi): 960cc/min

5 bar (72.5psi): 1050cc/min

Latency (Dead Time): 0.4ms at 14 volts

Excellent pulse width and predictability for

easy tuning and accurate compensations.

Length: 70 mm, overall, 62 mm oring to oring

Diameter: 21.3 mm

Orings: Top - 11.6 mm OD; Bottom - 16.0 mm OD

Resistance: 12.2 Ohms

Electrical connector type: Standard Toyota with offset guides to fit stock harness.

You are puchasing a set of 4 (four) Denso, Fiveomotorsport high performance,

high impedance, flow-matched "Asphalt II" fuel injectors custom fitted for S2000 or equivalent 2.0 4 cylinder engine -

Flow rated at 1600cc/min at 3 BAR. See complete flow chart.

Also a set of 4 (four) U.S. CAR to Keihin electrical connector adapters.

This Denso fuel injector is part of our new "ASPHALT II" series of newest generation, flow matched superstreet and racing fuel injectors.

All 1600cc fuel injector sets come with a flow DATA SHEET and Electrical Adapter set.

The injectors incorporate a single pintle fuel delivery nozzle with a wide cone spray for excellent fuel atomization.

Introductory Price: $429.99 per set of 4

Use for naturally aspirated and forced-air/exhaust 2.0L 4 cylinder engines.

SPECIAL NOTE to our customers: This is a flow matched set of Denso/Fiveo fuel injectors. Viton orings and connectors are supplied for installation modified S2000 2.0L 4 cylinder engines (EV6/Keihin adapters supplied).

This injector set is sold with a money back guarantee. If you are not 100% satisfied we will exchange or refund your purchase price for returned, unused and uninstalled fuel injectors. You pay only the shipping.

Injector Body Design: Metal and composite plastic

Flow rates: Listed at 80% duty cycle

This set is flow matched to within 0.5 to 1.0%

(These are true and tested flow rates of this individual set of 4 fuel injectors).

We use the industry standard Heptane as our testing agent.

1600 cc/min at 43.5 psi (3 bar)

1710 cc/min at 50 psi (3.5 bar)

1830 cc/min at 58psi (4 bar)

Dead Time: 0.6 ms at 14 Volts

This Denso injector will function at rail pressures in excess of 130 psi, 9 bar.

Excellent low pulse width response with predictable response down to 1 ms.

Excellent atomization for modern multi-valve engines.

Injector type: New generation EV6

Application: Super-street and racing, natually- and forced-aspirated engines.

Fuel Delivery: Single-hole, modified disc

Electrical Connector: EV6, (U.S. CAR)

Spray type: wide cone, maximum atomization

Length: 2.5 inches, 62 mm

Diameter: 19 mm

Orings: Top and bottom, Viton

Resistance: 11.8-15.5 Ohms (12.5)

Fuel types: All type gasoline, Methanol, E85, E25, E10

4 Wired, two ended electrical connector adapters, included.

Buy from a proven seller.

This is our 10th year. Fiveomotorsport has also been a Power Seller on ebay since 2000 with over 4100 Positive Feedbacks

.

We are fuel injector experts - email with your questions.

All injector sets are sold with our 36 Months/Unlimited Miles Warranty.

All our "Asphalt II" series injectors are guaranteed flow matched.

We adhere to the latest technology and craftmanship techniques.

You are puchasing a set of 4 (four) Denso, Fiveomotorsport high performance,

high impedance, flow-matched "Asphalt II" fuel injectors custom fitted for S2000 or equivalent 2.0 4 cylinder engine -

Flow rated at 1600cc/min at 3 BAR. See complete flow chart.

This set of fuel injectors includes everything you need for installation.
All upper and lower orings/seals
A set of 4 (four) U.S. CAR to Keihin electrical connector adapters - Plug'n'tune - no wire soldering or crimping.

This Denso fuel injector is part of our new "ASPHALT II" series of newest generation, flow matched superstreet and racing fuel injectors.

All 1600cc fuel injector sets come with a flow DATA SHEET.

The injectors incorporate a single pintle fuel delivery nozzle with a wide cone spray for excellent fuel atomization.

Use for naturally aspirated and forced-air/exhaust 2.0L 4 cylinder engines.

SPECIAL NOTE to our customers: This is a flow matched set of Denso/Fiveo fuel injectors. Viton orings and connectors are supplied for installation modified S2000 2.0L 4 cylinder engines (EV6/Keihin adapters supplied).

This injector set is sold with a money back guarantee. If you are not 100% satisfied we will exchange or refund your purchase price for returned, unused and uninstalled fuel injectors. You pay only the shipping.

Injector Body Design: Metal and composite plastic

Flow rates:

This set is flow matched to within 0.5 to 1.0%

(These are true and tested flow rates of this individual set of 4 fuel injectors).

We use the industry standard Heptane as our testing agent.

1600 cc/min at 43.5 psi (3 bar)

1710 cc/min at 50 psi (3.5 bar)

1830 cc/min at 58psi (4 bar)

Dead Time: 0.6 ms at 14 Volts

This Denso injector will function at rail pressures in excess of 130 psi, 9 bar.

Excellent low pulse width response with predictable response down to 1 ms.

Excellent atomization for modern multi-valve engines.

Injector type: New generation EV6

Application: Super-street and racing, natually- and forced-aspirated engines.

Fuel Delivery: Single-hole, modified disc

Electrical Connector: EV6, (U.S. CAR)

Spray type: wide cone, maximum atomization

Length: 2.5 inches, 62 mm

Diameter: 19 mm

Orings: Top and bottom, Viton

Resistance: 11.8-15.5 Ohms (12.5)

Fuel types: All type gasoline, Methanol, E85, E25, E10

4 Wired, two ended electrical connector adapters, included.

Buy from a proven ebay seller.

This is our 10th year. Fiveomotorsport has also been a Power Seller on ebay since 2000 with over 4100 Positive Feedbacks.

We are fuel injector experts - email with your questions.

All injector sets are sold with our 36 Months/Unlimited Miles Warranty.

All our "Asphalt II" series injectors are guaranteed flow matched.

We adhere to the latest technology and craftmanship techniques.

You are puchasing a set of 4 (four) Denso, Fiveomotorsport high performance,

high impedance, flow-matched "Asphalt II" fuel injectors custom fitted for S2000 or equivalent 2.0 4 cylinder engine -

Flow rated at 2000cc/min at 3.5 BAR. See complete flow chart.

Electrical connector adapters included for installation.

This Denso fuel injector is part of our new "ASPHALT II" series of newest generation, flow matched superstreet and racing fuel injectors.

All 2000cc fuel injector sets come with a flow DATA SHEET.

The injectors incorporate a single pintle fuel delivery nozzle with a wide cone spray for excellent fuel atomization.

Use for naturally aspirated and forced-air/exhaust 2.0L 4 cylinder engines.

SPECIAL NOTE to our customers: This is a flow matched set of Denso/Fiveo fuel injectors. Viton orings and connectors are supplied for installation modified S2000 2.0L 4 cylinder engines (EV6/Keihin adapters supplied).

This injector set is sold with a money back guarantee. If you are not 100% satisfied we will exchange or refund your purchase price for returned, unused and uninstalled fuel injectors. You pay only the shipping.

Injector Body Design: Metal and composite plastic

This set is flow matched to within 0.5 to 1.0%

(These are true and tested flow rates of this individual set of 4 fuel injectors).

We use the industry standard Heptane as our testing agent.

1990 cc/min at 43.5 psi (3 bar)

2170 cc/min at 50 psi (3.5 bar)

2300 cc/min at 58psi (4 bar)

Dead Time: 1.20 ms at 14 Volts

This Denso injector will function at rail pressures in excess of 101 psi, 7 bar.

Excellent low pulse width response with predictable response down to 1 ms.

Excellent atomization for modern multi-valve engines.

Injector type: New generation EV6, saturated

Application: Super-street and racing, natually- and forced-aspirated engines.

Fuel Delivery: Single-hole, modified disc

Electrical Connector: EV6, (U.S. CAR)

Spray type: wide cone, maximum atomization

Length: 2.5 inches, 62 mm

Diameter: 19 mm

Orings: Top and bottom, Viton

Resistance: 11.8-15.5 Ohms (12.5)

Fuel types: Rated for flex fuel. All type of gasoline, Methanol, E85, E25, E10

Buy from a proven ebay seller.

This is our 10th year. Fiveomotorsport has also been a Power Seller on ebay since 2000 with over 4100 Positive Feedbacks.

We are fuel injector experts - email with your questions.

All injector sets are sold with our 36 Months/Unlimited Miles Warranty.

All our "Asphalt II" series injectors are guaranteed flow matched.

We adhere to the latest technology and craftmanship techniques.