US/Euro High Performance Chrysler Fuel Injectors

EV14 US, LSA LS9 LS3 LS6 LS2 LS1 Chevy Ford Cadillac Corvette;Domestic Compact-, Standard- and Long-Fit 233UX - 6 FLOW RATES Fuel Injectors All...
Read More

EV14 US, LSA LS9 LS3 LS6 LS2 LS1 Chevy Ford Cadillac Corvette;

Domestic Compact-, Standard- and Long-Fit 233UX - 6 FLOW RATES Fuel Injectors

All new Fiveomotorsport Custom Bosch EV14, high-performance, flow-matched, fuel injectors.
WATCH OUR PULSE TEST VIDEO.

• US Domestic and European fit
  Sample p/n: 0280158051-42lbs/hr

• 48 mm Compact Length (38 mm oring to oring)

• 64 mm Standard Length (52 mm oring to oring)

• 76 mm Long Length (65 mm oring to oring)

• Custom manufactured flow rates using genuine German-made EV14 injectors

• All new O-rings supplied for installation

• Custom flow-matched sets include flow data sheet for easy tuning

• Available in various flow rates:  280cc, 300cc, 350cc, 450cc, 530cc, 630cc, 750cc and 830cc/min (28.5lb, 33lb, 42lb, 50lb, 60lb, 72lb and 80lb/hr)

• Listed prices are per injector

FLOW CHART: Each set is sold with a complete flow-data chart indicating individually tested dynamic and static flow rates at 3.0, 3.5, and 4.0 BAR at 15%, 50% and 100% duty-cycle for each injector, along with dead time (latency values) from 8 to 18 volts. Flow matching was done using industry-standard equipment of the highest quality. The testing was performed at varying temperatures to achieve realistic results.

Our injector is a better choice for most modders and tuners.
Custom-manufactured using brand new, genuine name-brand fuel injector "cores" in large-quantity batches to achieve the highest quality product. The resulting sets are FLEX or all-fuels rated; including all gasoline types - oxygenated gasoline, 102-110 octane (MTBE), E100, E-85. The finished injectors are then flow tested and inscribed with a control number. Data is recorded for each injector. They are then carefully selected into tightly matched sets ready for shipping.

Tested Static Flow Rates for the 350cc fuel injectors: (33lbs = 4.5gps)
350 cc/min at 3.0 BAR (43.5 psi)
382 cc/min at 3.5 BAR (50.8 psi)
413 cc/min at 4.0 BAR (58.0 psi)

Tested Static Flow Rates for the 350cc fuel injectors: (42lbs = 5.3gps)
440 cc/min at 3.0 BAR (43.5 psi)
475 cc/min at 3.5 BAR (50.8 psi)
530 cc/min at 4.0 BAR (58.0 psi)

Tested Static Flow Rates for the 500cc fuel injectors: (47lbs = 5.8gps)
500 cc/min at 3.0 BAR (43.5 psi)
548 cc/min at 3.5 BAR (50.8 psi)
595cc/min at 4.0 BAR (58.0 psi)

Tested Static Flow Rates for the 550cc fuel injectors: (52lbs = 6.3gps)
550 cc/min at 3.0 BAR (43.5 psi)
598 cc/min at 3.5 BAR (50.8 psi)
645 cc/min at 4.0 BAR (58.0 psi)

Tested Static Flow Rates for the 650cc fuel injectors: (62lbs = 7.6gps)
630 cc/min at 3.0 BAR (43.5 psi)
707 cc/min at 3.5 BAR (50.8 psi)
763 cc/min at 4.0 BAR (58.0 psi)

Tested Static Flow Rates for the 750cc fuel injectors: (72lbs = 9.1gps)
750 cc/min at 3.0 BAR (43.5 psi)
818 cc/min at 3.5 BAR (50.8 psi)
885 cc/min at 4.0 BAR (58.0 psi)

Tested Static Flow Rates for the 830cc fuel injectors: (80lbs = 10.0 gps)
830 cc/min at 3.0 BAR (43.5 psi)
905 cc/min at 3.5 BAR (50.8 psi)
979 cc/min at 4.0 BAR (58.0 psi)

(Some slight variation in flow rate can be expected--all sets are matched to within 1.0%).

Coil Resistance: High Impedance/Saturated 12.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 BAR)

Surface finish: Black composite

Indian motorcycle stock pn 0280155766 38mm EV6

INSTALL THIS FUEL INJECTOR UPGRADE IN A HIGHLY-MODIFIED, HIGH PERFORMANCE ENGINE ONLY LONG NOZZLE - Mimics OE fuel injector Four flow-rates available...
Read More

INSTALL THIS FUEL INJECTOR UPGRADE IN A HIGHLY-MODIFIED, HIGH PERFORMANCE ENGINE ONLY

• LONG NOZZLE - Mimics OE fuel injector
• Four flow-rates available (see drop-down menu): 58lb, 600cc; and 72lb, 750cc
• Jetronic Electrical Connector - Direct fit - No rewiring required
• Does not require any adapters
• Price listed is per injector
• Multiple injectors ordered are delivered in flow-matched sets
• Retuning for optimized engine performance is recommended

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product.
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flowed and inscribed with a control number.
Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.

Injector type: EV14-LONG NOZZLE, with internal filter
Part number: S85-315, S85-450, S85-550, S85-750
Porsche 911 Turbo: 52lb and 72lb

Flow Rates:
52lb/550cc, Single Nozzle
72lb/750cc, Single Nozzle
Resistance: 12.8 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
Surface finish: Black composite
Connector: EV1, Jetronic
All new 14.5 mm Viton o-rings Included for installation.

BOSCH, 0280158038, EV14, Extended Nozzle. Fuel Injectors LIST PRICE: ONE (1) FUEL INJECTOR "COMPACT" Length - 37.5 mm O-ring to o-ring Fits: BMW...
Read More

BOSCH, 0280158038, EV14, Extended Nozzle. Fuel Injectors

• LIST PRICE: ONE (1) FUEL INJECTOR
  

• "COMPACT" Length - 37.5 mm O-ring to o-ring

• Fits: BMW R1200

Nozzle: 4-hole disc
Flow Rates: OEM 339cc, 550cc, 650cc
Resistance: 12.8 Ohms
Voltage: 6-18 Volts, Nominal 13.5 Volts
Amperage: 1.0 Amp
Surface finish: Black composite
Connector: Minitimer

Fiveomotorsport introduces the "Black-Ops, M-Series" High-Performance, Flow-Matched Fuel Injectors (see complete details and specifications...
Read More

Fiveomotorsport introduces the "Black-Ops, M-Series" High-Performance, Flow-Matched Fuel Injectors (see complete details and specifications below)!

LIST PRICE INCLUDES: ONE (1) FUEL INJECTOR WITH ELECTRICAL CONNECTOR (see photos and drop-down menu for options)

• Available in flow-rates from 270cc to 1600cc/min (25 lbs to 150 lbs/hr) at 3 Bar.
• Price shown is for a single injector with selected adapter (see drop-down menu for pricing).
• Order multiple injectors. - Always delivered in flow-matched sets with data sheet.
• Please use drop-down menu to select flow-rate and electrical connector type.

After several years of R&D and after testing many different injector core/body configurations, Fiveomotorsport is releasing the new Black-Ops M-Series Fuel Injectors for sale to the automotive industry for street-performance, racing, and all high-performance vehicles.

• Made in the USA
• ULTRA FAST RESPONSE TIMES:
• CONSISTENT EVEN AT VERY LOW PULSE WIDTHS
• LOW DEAD-TIMES ACROSS THE OPERATING VOLTAGE RANGE
• FREE ELECTRICAL ADAPTERS INCLUDED
• COMPATIBLE WITH ALL PERFORMANCE FUELS INCLUDING ETHANOL/METHANOL
• ALL STAINLESS STEEL INTERNAL PARTS

Built with a robust internal coil design that delivers ultra-fast response time, great idle and lots of high-end power. Extremely reliable up to 95% duty cycle (note: if you are running above 90% duty cycle, it is better to move up to a higher-flowing fuel injector). Higher flow-rates available up to 1600cc/min.

Similar injectors have been used as OE injectors proving their durability and consistency -- partly due to the new larger insulated coil.
Notice the 17 mm body diameter (see photos) - approximately 2 mm larger than a standard Bosch EV14 injector.

Our custom-manufactured Black-Ops injectors bring ultra-fast minimum pulse widths never seen before in modern Bosch EV14/EV6-style high-impedance fuel injectors (Quicker than even the best low-impedance injectors).

Choose your ELECTRICAL CONNECTOR ADAPTER TYPE—included with each injector. SEE PHOTOS.

Fiveomotorsport is able to guarantee flow-matched sets from 2 to 12 injectors matched both statically and dynamically to within 0.5-1.0%.

Fiveomotorsport's new single-hole w/diffuser plate fuel nozzle - WATCH VIDEO.
This new nozzle guarantees a tight cone spray throughout the rpm range. And where it gets really good is at high volume/high rpm and high pressure at boost.
Testing has been completed. Check out the video of the Black-Ops M80 operating at 7,200 rpm and a pulse width of only 2 ms.
Even with the simulated conditions you will still see the super-fine droplets our new single-hole nozzle produces.

This injector can provide a smooth idle quality on engines running all types of performance fuel.

Fuel Injector Specifications:
Fuel Delivery:  315cc - 450cc/min use a 4-hole nozzle, and 550cc/min and above use a Single-hole ball valve (for maximum fuel atomization).
Coil Resistance: 12.5 OHMS (high-impedance)
Flow-Matched sets are delivered in flow rates at or very near the advertised flow rate (you will get a set that is exactly flow-matched to within a best-in-the-business 0.5-1.0% -- guaranteed).
Minimum Pulse Width: 1.4 ms

• With your order you will receive a complete flow-data-sheet showing actual tested flow rates for your individual injectors (see photos)
• Data sheet includes static flow data at 3 Bar (43.5 psi), 3.5 Bar (50.8 psi) and 4 Bar (58.0 psi). Black-Ops injectors can operate at 100+ psi.
• Data sheet includes dynamic flow data at 3 Bar at 6000 rpm and 5.0 ms and idle data at 800 rpm and 1.5 ms
• Data sheet includes full latency (dead-time) table from 8 volts to 18 volts at 3 Bar

Injector Dimensions:

Electrical connector type: USCAR
Overall length: 74 mm - 3.0 in
Body Diameter: 17 mm - 0.70 in
O-ring to o-ring, on center: 66 mm - 2.5 in
Upper o-ring diameter: 14 mm - 0.50 in
Lower o-ring diameter: 14 mm - 0.50 in
O-ring/seal material: Viton

Fiveomotorsport introduces the "Black-Ops, M-Series" High-Performance, Flow-Matched Fuel Injectors (see complete details and specifications...
Read More

Fiveomotorsport introduces the "Black-Ops, M-Series" High-Performance, Flow-Matched Fuel Injectors (see complete details and specifications below)!

Black-Ops: STANDARD-length US/Euro, LS2, SRT, Hemi, Ecotec, Volvo T6, Genesis Coupe 2.0L, Nissan GT-R, 370Z, and many more

LIST PRICE INCLUDES: ONE (1) FUEL INJECTOR (please see photos and drop-down menu for connector options)

• Available in flow-rates from 270cc to 1600cc/min (25 lbs to 150 lbs/hr) at 3 Bar.
• Price shown is for a single injector with selected connector (see drop-down menu for pricing).
• Order multiple injectors. - Always delivered in flow-matched sets with data sheet.
• Please use drop-down menu to select flow-rate and electrical connector type.
• LS2, Micro Sprint, SRT, Mini Cooper, Mercedes-Benz, BMW, etc.

After several years of R&D and after testing many different injector core/body configurations, Fiveomotorsport is releasing the new Black-Ops M-Series Fuel Injectors for sale to the automotive industry for street-performance, racing, and all high-performance vehicles.

• Manufactured in the USA
• ULTRA FAST RESPONSE TIMES
• CONSISTENT EVEN AT VERY LOW PULSE WIDTHS
• LOW DEAD-TIMES ACROSS THE OPERATING VOLTAGE RANGE
• FREE ELECTRICAL ADAPTERS INCLUDED (see menu for options)
• COMPATIBLE WITH E85 and ALL PERFORMANCE FUELS
• ALL STAINLESS STEEL INTERNAL PARTS

Built with a robust internal coil design that delivers ultra-fast response time, great idle and lots of high-end power. Extremely reliable up to 95% duty cycle (note: if you are running above 90% duty cycle, it is better to move up to a higher-flowing fuel injector). Higher flow-rates available up to 1600cc/min.

Similar injectors have been used as OE injectors proving their durability and consistency -- partly due to the new larger insulated coil.
Notice the 17 mm body diameter (see photos) - approximately 2 mm larger than a standard Bosch EV14 injector.

Our custom-manufactured Black-Ops injectors bring ultra-fast minimum pulse widths never seen before in modern Bosch EV14/EV6-style high-impedance fuel injectors (Quicker than even the best low-impedance injectors).

Choose your ELECTRICAL CONNECTOR ADAPTER TYPE—included with each injector. SEE PHOTOS.

Fiveomotorsport is able to guarantee flow-matched sets from 2 to 12 injectors matched both statically and dynamically to within 0.5-1.0%.

Fiveomotorsport's new single-hole w/diffuser plate fuel nozzle - WATCH VIDEO.
This new nozzle guarantees a tight cone spray throughout the rpm range. And where it gets really good is at high volume/high rpm and high pressure at boost.
Testing has been completed. Check out the video of the Black-Ops M80 operating at 7,200 rpm and a pulse width of only 2 ms.
Even with the simulated conditions you will still see the super-fine droplets our new single-hole nozzle produces.

This injector can provide a smooth idle quality on engines running all types of performance fuel.

Fuel Injector Specifications:
Fuel Delivery:  Ball valve (for maximum fuel atomization).
Coil Resistance: 12.5 OHMS (high-impedance)
Flow-Matched sets are delivered in flow rates at or very near the advertised flow rate (you will get a set that is exactly flow-matched to within a best-in-the-business 0.5-1.0% -- guaranteed).
Minimum Pulse Width: 1.4 ms

• With your order you will receive a complete flow-data-sheet showing actual tested flow rates for your individual injectors (see photos)
• Data sheet includes static flow data at 3 Bar (43.5 psi), 3.5 Bar (50.8 psi) and 4 Bar (58.0 psi). Black-Ops injectors can operate at 100+ psi.
• Data sheet includes dynamic flow data at 3 Bar at 6000 rpm and 5.0 ms and idle data at 800 rpm and 1.5 ms
• Data sheet includes full latency (dead-time) table from 8 volts to 18 volts at 3 Bar

Injector Dimensions:

Electrical connector type: USCAR
Overall length: 62 mm - 2.5 in
Body Diameter: 17 mm - 0.70 in
O-ring to o-ring, on center: 54 mm - 2.13 in
Upper o-ring diameter: 14 mm - 0.55 in
Lower o-ring diameter: 14 mm - 0.55 in
O-ring/seal material: Viton

*By special request, this injector can be delivered in the X12 configuration with o-ring to o-ring length of 59.5mm and overall length of 66.5mm.  Please make a note in the comments section when ordering.

INSTALL THIS FUEL INJECTOR UPGRADE IN A HIGHLY-MODIFIED, HIGH PERFORMANCE; Turbo- and Supercharged ENGINE ONLY"STANDARD" OEM FIT - 52 mm O-ring to...
Read More

INSTALL THIS FUEL INJECTOR UPGRADE IN A HIGHLY-MODIFIED,
HIGH PERFORMANCE; Turbo- and Supercharged ENGINE ONLY

"STANDARD" OEM FIT - 52 mm O-ring to O-ring - Fits: M-B, Mercedes-AMG*, BMW Z4 S85, S62, M54, Audi, VW, R32,

• LONG NOZZLE - Mimics OE fuel injector
• Four flow-rates available (see drop-down menu):  57lb, 600cc; 72lb, 750cc; 95lb, 1000cc; 114lb, 1200cc
• Jetronic Electrical Connector - Direct fit - No rewiring required
• Does not require any adapters
• Price listed is per injector
• Multiple injectors ordered are delivered in flow-matched sets
• Retuning for optimized engine performance is recommended

S85 BMW, Volvo, M-B, VW, Porsche 911 Turbo, Mercedes-AMG 6.3L*, VW R32, 
Fuel Injectors, Long Nozzle, 57lb, 72lb, 95lb, 114lb

*NOTE: The (2007-2014) 6.3L AMG installation will require a pigtail connector replacement - No extra charge
2007 or higher your AMG uses a special wiring harness and requires you to change the connector to fit your new set of fuel injectors.

Here is the link you need.
The pigtails are complimentary. Add the set of 8 EV-1 pigtails to your cart and the Fiveomotorsport office will delete the cost and send them with your fuel injectors.
https://www.fiveomotorsport.com/ev1-female-connectors

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.

Injector type: EV14-LONG NOZZLE, with internal filter
Part numbers: S85-315, S85-480, S85-550, S85-750, S85-1000

Nominal Static Flow Rates:

• 57lb/600cc, 6-hole nozzle
• 72lb/750cc, 6-hole nozzle
• 95lb/1000cc, Single hole nozzle
• 114lb/1200cc, Single hole nozzle

Resistance: 12.8 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Sample Latency: 0.600 ms at 14 volts, 3 BAR
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
Surface finish: Black composite
Connector: EV1, Minitimer
All new 14.5 mm Viton o-rings Included for installation.

24lbs/hr Bosch 0280150947 Blue-Top, U.S.  DOMESTIC BRAND NEW FUEL INJECTORSList Price Includes: One (1) fuel injector ready to install.OEM...
Read More

24lbs/hr Bosch 0280150947

Blue-Top, U.S.  DOMESTIC BRAND NEW FUEL INJECTORS

List Price Includes: One (1) fuel injector ready to install.

OEM original equipment replacement part for the Ford 7.5L 460 V-8, 5.0L Mustang Cobra

• Genuine Bosch Blue Top
• 4-hole Disc Fuel Nozzle
  
• Replaces Ford p/n: E8TE, E7TE
• Bosch p/n 0280150947,

Injector Type: EV1, saturated

Flow rate: 24lbs/hr at 43.5 psi, 255 cc/min @ 3 bar

Fuel Nozzle: 4-hole atomizer disc

Electrical connector type: EV1

Length: 3 inches, 74 mm

Diameter: 24 mm

O-rings: New, Viton, Top and bottom, 14.5 mm

Resistance: 15.3

(All fuel injector specifications meet or exceed the manufacturer's specification standard).

Tested Flow Rates:
24.2 lbs/hr at 43psi (3bar)
25.5 lbs/hr at 50psi (3.5bar)
28.0 lbs/hr at 58psi (4bar)

The insulated coil means no more failed starts and burn-outs due to fuel impurities.

All new Fiveomotorsport Custom EV14, Black Ops Series Fuel Injectors High-performance, flow-matched, fuel injectors Use for:  Charger...
Read More

All new Fiveomotorsport Custom EV14, Black Ops Series Fuel Injectors

• High-performance, flow-matched, fuel injectors
  
• Use for:  Charger, Challenger, Jeep Fuel Injectors
  

STAGE 1 UPGRADE - USE THIS INJECTOR with custom tuning

• PLUS 15 - 15% increase over-stock flow rate
• We recommend this injector installation with consultation from a professional tuner
• Listed price includes one (1) fuel injector - MATCHED SETS AVAILABLE
• OE FIT: Nothing else to buy!
  
  

US Domestic Fit -

• DIRECT-FIT - NO PHYSICAL MODIFICATIONS REQUIRED
• 64 mm Standard Length (52 mm oring to oring)
• New O-rings supplied for installation

Custom flow matched sets available

4-hole SPLIT STREAM nozzle

Static Flow Rate: 285 cc/min at 3.0 BAR (43.5 psi)

Resistance: 12.5 Ohms (high-impedance)

Coil Resistance: High Impedance/Saturated 12.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

All Viton o-rings Included for installation.

Siemens-Deka Fuel Injector LIKE-NEW, TAKE-OUT FUEL INJECTORSWE sell this fuel injector as-new with our NEW PARTS Warranty - 3 Years/Unlimited...
Read More

Siemens-Deka Fuel Injector 

LIKE-NEW, TAKE-OUT FUEL INJECTORS
WE sell this fuel injector as-new with our NEW PARTS Warranty - 3 Years/Unlimited Miles

Original Manufacturers Part Number: 04591851AA

List Price: 1 (one) fuel injector

• This Siemens fuel injector incorporates a four-hole, convex disc fuel outlet nozzle. 
• This 4 hole nozzle helps to atomize the fuel into very tiny droplets, making the fuel/air mixtures more highly combustible. 
• Each pulse of the injectors translates into more power and torque. 
• Along with more efficient burning and added miles per gallon.

Injector Body Design: Steel and composite plastic with black-band
Injector type: EV6/EV14, saturated
Static flow rate: 27.5 lbs/hr,  288 cc/min at 43.5 psi (3 bar)
Length: 2.8 inches, 72 mm. Center O-ring to O-ring: 54mm
Diameter: 21 mm
O-rings: New Viton Top and bottom, 14.5 mm
Resistance: 12.5 Ohms

• Restore the life and throttle response of your stock/slightly modified 4.7l or 5.7l HEMI V-8.
• Restore lost MPG, Add torque, Restore lost Horsepower
  
• Our photos show actual injectors you will receive.
• This set of fuel injectors is a manufacturer's original equipment (OEM) spec upgrade for the 4.7L/5.7L V-8.

Pontiac Buick 2.0 Turbo, Masarati 2.5L, Chrysler Dodge Plymouth 2.2L Turbo, 300cc/min Low impedance Fuel Injectors Fiveo Custom (Bosch-type) Fuel...
Read More

• Pontiac Buick 2.0 Turbo, Masarati 2.5L, Chrysler Dodge Plymouth 2.2L Turbo, 300cc/min Low impedance Fuel Injectors

• Fiveo Custom (Bosch-type) Fuel Injector - BRAND NEW

• This fuel injector replaces the old Bosch 0280150813

• MFG specifications, OE replacement fuel injectors

• Price listed is per injector - No core.

• 3 Year/Unlimited Miles Warranty

Fuel Injector Specifications:

Steel Body with black factory enamel - Plastic connector
Bosch type EV1 electrical connector
Flow Rate: 300 cc/min at 3 BAR - 28.5 lbs/hr at 43.5 PSI
Coil Resistance: 2.5-2.7 OHMS
Fuel Nozzle: Single Pintle

Brand New Siemens-Deka Fuel InjectorDodge Jeep Chrysler 5.7, 6.1 Hemi Jeep, Grand Cherokee, Charger, Challenger, 300, Magnum, Aspen, Durango, Dakota...
Read More

Brand New Siemens-Deka Fuel Injector

Dodge Jeep Chrysler 5.7, 6.1 Hemi Jeep, Grand Cherokee, Charger, Challenger, 300, Magnum, Aspen, Durango, Dakota, SRT8, - Brand New fuel injectors

Original Manufacturers Part Number: 05307479AA

List Price: 1 (one) fuel injector - matched sets available.

• This Siemens fuel injector incorporates a four-hole, convex disc fuel outlet nozzle. 
• This 4 hole nozzle helps to atomize the fuel into very tiny droplets. 
• Making the fuel/air mixtures more highly combustible. 
• Each pulse of the injectors translates into more power and torque. 
• Along with more efficient burning and added miles per gallon.

Injector Body Design: Steel and composite plastic with orange-band
Injector type: EV6/EV14, saturated
Static flow rate: 30.4 lbs/hr,  320 cc/min at 43.5 psi (3 bar)
Length: 2.8 inches, 72 mm. Center O-ring to O-ring: 54mm
Diameter: 21 mm
O-rings: New Viton Top and bottom, 14.5 mm
Resistance: 12.0 Ohms

• Restore the life and throttle response of your stock/slightly modified 4.7l or 5.7l HEMI V-8.
• Restore lost MPG, Add torque, Restore lost Horsepower
  
• Our photos show actual injectors you will receive.
• This set of fuel injectors is a manufacturer's original equipment (OEM) spec upgrade for the 4.7L/5.7L V-8. And is controlled by the stock ECU

THE NEWEST TECHNOLOGY INJECTORS FROM BOSCH & FIVEO-MOTORSPORTBOSCH EV14 STYLE, LONG-FIT FUEL INJECTORS with EV1 / MINITIMER STYLE CONNECTOR...
Read More

THE NEWEST TECHNOLOGY INJECTORS FROM BOSCH & FIVEO-MOTORSPORT

BOSCH EV14 STYLE, LONG-FIT FUEL INJECTORS with EV1 / MINITIMER STYLE CONNECTOR

• Listed Price is for a single fuel injector
• Many flow rates available (see menu for options)
• Delivered in Flow Balance and Matched Sets
• Direct Fit for many US / Euro applications with Bosch EV1 style injectors

DIRECT-FIT REPLACEMENT FOR MANY U.S. Domestic & European Applications

DIRECT-FIT REPLACEMENT FOR OLD-STYLE BOSCH, LUCAS & ROCHESTER INJECTORS

NO REWIRING & NO TOP-HAT EXTENDERS REQUIRED

NEWEST EV14 TECHNOLOGY

MANY FLOW-RATES AVAILABLE TO MEET YOUR HORSEPOWER NEEDS

High Resistance coils
Genuine Bosch EV14 fuel injectors
Delivered in Flow-Matched Sets
RATED FOR ALL-KNOWN FUELS; Gasoline, MTBE, Ethanol, E10, E25, E85, M100, Q VP racing, etc.
Complete latency tables at 3.0, 4.1, 4.8, 5.5, 6.2, & 6.9 BAR supplied with each set
Dynamic and static flow balanced sets are matched to within 1.0-1.5%  

Specifications:
This injector will function at rail pressures in excess of 116 psi, 8 bar.
Excellent low pulse width response with predictable response down to 1 ms.
Injector Body Design: EV14, black composite

Flow nozzles: 380cc and 450cc - 4-hole; 550, 650, 750, 850 & 1000cc - Single-hole/Ball-in-Disc
Electrical connector type: EV1 / Jetronic / Minitimer
Length: 3 in., 74 mm
Body Diameter: 16 mm
Orings: Viton, top and bottom, 14.5 mm
Resistance: 12.5 Ohms (high-impedance, no resistor box required)

*All fuel injector specifications meet or exceed the manufacturer's specification standard.

USE THESE FUEL INJECTORS FOR MODIFIED ENGINES ONLY - Jeep 4.0, 3.8, inline 6 cylinder.Wrangler, Cherokee, Rubicon, Sport, LIST PRICES INCLUDES...
Read More

USE THESE FUEL INJECTORS FOR MODIFIED ENGINES ONLY - Jeep 4.0, 3.8, inline 6 cylinder.
Wrangler, Cherokee, Rubicon, Sport,

LIST PRICES INCLUDES EITHER SINGLE (1) FUEL INJECTOR OR COMPLETE SETS WITH FUEL PUMP.
30lb Set with Fiveo Avenger fuel pump - Package-Deal: $449.99
36lb Set with Fiveo Avenger fuel pump - Package-Deal: $469.99 

Injector Body Design: EV6, black composite plastic.

Injector type: EV6, saturated

Fuel Nozzle: Dual-hole disc, split-fountain - maximum atomization

Flow rate: 30lbs/hr and 36lbs/hr at 43.5 PSI

Resistance: 14.2 Ohms

Electrical connector type: U.S. CAR

Length: 3 inches, 74 mm

Diameter: 19 mm

Orings: Viton, Top and bottom, 14.5 mm

 FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.

The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

Use for modified, supercharged/turbocharged and naturally aspirated engines.

Avenger 340 lph fuel pump, In tank, All-Fuels
Tech Data: 
Fiveomotorsport's In-Tank Fuel Pump Series features superior flow throughout a wide pressure range. 

At 40 psi our 00042 pump boasts more than 341.33 ltr/hr (90.1 g/hr). This pump is ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the original equipment (OEM) configuration. The Fiveo's In-Tank Pump Series is also perfect for use as a universal replacement for applications that require more flow to support forced air power-adders such as turbo and supercharged applications.

Fiveo's In-Tank Series are high-output, electric fuel pumps that fits most popular EFI applications.
Compact, lightweight pumps that bolts into many existing OEM hanger assemblies.

RATED FOR E85, Gasoline (MTBE additive)
00042 340 lph PUMP FEATURES A STRAIGHT-THROUGH, INLET TO OUTLET.

• P/N - 00042
• Fits most vehicles where popular aftermarket pumps are applicable
• Includes installation kit with filter
• Designed for in-tank use only
• Can be used in Carburetor and EFI applications
• Turbine pump mechanism increases durability and can be used in pulse modulated applications.

Fuel Pump Specs:
Applications: All applications that use the GSS342
Condition: Hermetically sealed, all components brand-new
Usage: In-tank using stock housing
Fuel Flow: 341.33 ltr/hr, 90.1 gal/hr
Version: High Pressure
Installation Kit Included: Yes
MIN Voltage: 12V
Operating Pressure: 0-120 psi determined by fuel pressure regulator

Fuel Pump Dimensions:
4.75" - 120mm, Inlet tip to outlet tip
3.125" - 80mm, Metal case only
1.650" - 42mm,  Diameter
Inlet width: 5/15" - 8mm - (See photos).
Outlet width: 5/16" - 8mm

Siemens, custom, flow-matched fuel injectors with US-CAR electrical connectors.  List Price Includes: One (1) fuel injector Multiple injectors...
Read More

Siemens, custom, flow-matched fuel injectors with US-CAR electrical connectors. 

• List Price Includes: One (1) fuel injector
  
  
• Multiple injectors delivered in flow matched sets.
  
  
• Our injectors are custom-manufactured from brand new American-made fuel injectors in lvery small-quantity batches to achieve the highest quality product. The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flow tested and inscribed with control numbers. Data is recorded for each injector. They are then sealed and placed in matched sets ready for shipment to shops, tuners and end-users.

Flow-rate options for naturally-aspirated V-8. Rated engine-horsepower (crank), assumes running premium gasoline.

• 30lb - 310cc - Up to 385 hp
• 32lb - 330cc - Up to 415 hp
• 36lb - 380cc - Up to 470 hp
  
  

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.

The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

E85 Fuel usage - Because of the high-H2O levels, ethanol will not rust but tends to "dry" the orifices in stainless-steel constructed fuel injectors. Customers should beware that this can be a problem with some fuel injectors and may cause a "sticking" problem. Periodic lubrication is recommended if your engine will be left without starting/running for extended periods - weeks to months - at a time.

Injector Body Design: EV6, black composite plastic.

Injector type: Saturated

Fuel Nozzle: Multi-hole, split-fountain for maximum atomization

Flow rates:  30lbs/310cc, 32lbs/330cc, 36lbs/380cc, 43.5 PSI

Dead time (latency): 0.85 ms at 14 volts

Electrical connector type: US-CAR

Length: 3 inches, 74 mm

Body Diameter: 19 mm

Orings: Viton, Top and bottom, 14 mm

Resistance: 14.5 Ohms

(All fuel injector specifications meet or exceed the manufacturer's specification standard).

Flow-matched fuel injector custom manufactured exclusively for Fiveomotorsport.comP/N: 024U315 - FLOW MATCHED SETS AVAILABLE 30.5 lb/hr, 320 cc/min...
Read More

Flow-matched fuel injector custom manufactured exclusively for Fiveomotorsport.com
P/N: 024U315 - FLOW MATCHED SETS AVAILABLE

• 30.5 lb/hr, 320 cc/min 43.5 PSI
• Resistance: 14.5 OHMS
• Latency (dead time): 14 volts, 0.634 ms at 3 Bar
• This new generation Bosch fuel injector replaces old-style Bosch 0280150945, 0280150911
  
• New generation 4-hole fuel delivery nozzle for improved fuel atomization and increased efficiency.

LIST PRICE INCLUDES ONE (1) FUEL INJECTOR.  MULTIPLE INJECTORS ORDERED ARE DELIVERED IN FLOW-MATCHED SETS

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in large-quantity batches to achieve the highest quality product.
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flow tested and inscribed with a control number.
Test data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individually tested static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

Price listed is for a single injector - Manufactured in the U.S.A."COBALT" BLUE BOSCH FUEL INJECTOR - The Bosch 0280155767 flows 375 cc/min at a...
Read More

Price listed is for a single injector - Manufactured in the U.S.A.

"COBALT" BLUE BOSCH FUEL INJECTOR -

• The Bosch 0280155767 flows 375 cc/min at a tested pressure of 3 Bar, or 36 lbs/hr at 43.5 psi.
• Latency (Offset): 12 volts, 0.605 ms; 14 volts, 0.305 ms.
• High-impedance/high-resistance/12.0 Ohms
• FUEL NOZZLE: 4-HOLE DISC - Excellent atomization

Our lab routinely tests and retests incoming parts.
Recent open flow test of six injectors showed a flow of 368-378 cc/min at a constant pressure of 43.5 PSI for each injector tested.

SPECIAL NOTE: We will lathe-cut a secondary fuel rail retainer slot above the primary one at no extra cost on the Cobalt.

Price listed is for a single injector.  When you purchase multiple injectors they are delivered in sets--you are guaranteed to receive a factory...
Read More

Price listed is for a single injector. 

When you purchase multiple injectors they are delivered in sets--you are guaranteed to receive a factory flow-matched set of fuel injectors.

• The Bosch 0280155767 flows 375 cc/min at a tested pressure of 3 bar, or 36 lbs/hr at 43.5 psi.
• Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms.
• High-impedance/high-resistance/14.0 Ohms
• FUEL NOZZLE: 4-HOLE DISC - Ultimate Atomization

Our lab routinely tests and retests incoming parts.
Recent open flow test of six injectors showed a flow of 368-378 cc/min at a constant pressrure of 43.5 PSI for each injector tested.

Flow-matched fuel injector custom manufactured exclusively for Fiveomotorsport.comP/N: 024U400 - FLOW MATCHED SETS AVAILABLE Price listed is for a...
Read More

Flow-matched fuel injector custom manufactured exclusively for Fiveomotorsport.com
P/N: 024U400 - FLOW MATCHED SETS AVAILABLE

• Price listed is for a single fuel injector
• 38lb/hr, 400 cc/min @ 3 Bar (43.5 psi)
  
• Resistance: 12.8 OHMS
• Latency (dead time): 14.3 volts, 0.634 ms at 3 Bar
• This new generation Bosch fuel injector replaces old-style Bosch
  
• New generation 4-hole fuel delivery nozzle for improved fuel atomization and increased efficiency.

LIST PRICE INCLUDES ONE (1) FUEL INJECTOR.  MULTIPLE INJECTORS ORDERED ARE DELIVERED IN FLOW-MATCHED SETS

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in large-quantity batches to achieve the highest quality product.
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flow tested and inscribed with a control number.
Test data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individually tested static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

You are purchasing a Bosch Original Equipment (OEM) fuel injectors. LIST PRICE INCLUDES: 1 (ONE) FUEL INJECTOR Guaranteed Genuine Bosch - NO...
Read More

You are purchasing a Bosch Original Equipment (OEM) fuel injectors.

• LIST PRICE INCLUDES: 1 (ONE) FUEL INJECTOR
• Guaranteed Genuine Bosch - NO OFF-SHORE COPIES.
• OE Ford 2003-04 SVT Cobra

Dear Customer,
This Bosch/Ford Original Equipment (OEM) fuel injector is flow rated at 39lbs/hr at 39 psi and 42lbs/hr at 43.5 PSI. This fuel injector and flow rating is the stock replacement for the engines listed. Brand new fuel injectors will increase your miles per gallon and throttle response.

Use for stock replacement OEM original equipment replacements.
Regain lost miles per gallon, and throttle response by replacing old, tired fuel injectors.

Be certain to check and maintain the other parts of the fuel/air system when changing fuel injectors. If you have a fuel filter it should be checked or changed at the same time as the fuel injectors.

FITMENT: 2003-04 4.6L Mustang Cobra (Supercharged) Engine Code: (Y)
Can be used an upgrade for Ford 4.6L (W) and 5.4L (5,V) engines.

Injector Body Design: Blue Composite, EV6
Injector type: Saturated
Fuel Nozzle: 4-hole disc
Flow rate: 39lbs/hr at 39 psi./2.7 BAR; 42lbs/hr at 43.5 psi/3.0 BAR
Electrical connector type: EV6, U.S. CAR
Length: 3 inches, 74 mm
Diameter: 19 mm
Orings: Top and bottom, Viton, 14.5 mm
Resistance: 12.8-15.5 Ohms
(All fuel injector specifications meet or exceed the manufacturer's specification standard).

Buy from a seller you can trust.

Quantity set discount purchases available.
We are fuel injector experts - email with your questions.
All injector sets are sold with the manufacturer's warranty plus our 36 Months/Unlimited Miles Warranty.

Item Condition:
All of the Fiveomotorsport fuel injectors are shipped in brand-new condition unless otherwise stated as reconditioned or take-out injectors. All fuel injectors are covered by our warranty outlined below, unless otherwise stated.
Fiveo's Exclusive Warranty:
We stand behind all of our products with our 36 month/unlimited miles warranty. Within 14 days of your purchase date if you are not 100% satisfied, we will refund your purchase price for returned unused fuel injectors in their original packaging, minus shipping costs and up to a 15% restocking fee. If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector. You pay only the shipping costs. (Some racing applications may void this warranty).
Shipping and Handling Time:
All orders received by 2pm PST Monday-Friday will ship the same day. Orders received after 2pm on Friday will ship the following Monday. It is the buyer's responsibility to pay all customs fees, duties, import taxes, and related charges.
Average delivery times are listed below:
USPS priority mail – 3 business days
USPS Express International – 5 to 8 business days
FedEx Overnight
FedEx 2-Day

42lbs/hr, 450 cc/min @ 3 bar, 14.2 OhmsLatency (dead time): 12 volts, 0.465 ms; 14 volts, 0.225The injectors incorporate a 4-hole disc fuel delivery...
Read More

42lbs/hr, 450 cc/min @ 3 bar, 14.2 Ohms

Latency (dead time): 12 volts, 0.465 ms; 14 volts, 0.225

The injectors incorporate a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.

Injector Body Design: Metal and composite plastic

Flow rate: 42lbs/hr, 450cc/min at 43.5 psi, 3 BAR

Electrical connector type: EV1 (minitimer)

Length: 2.4 inches, 61.5 mm
O-ring to o-ring: 2.0 inches, 52.5 mm

Diameter: 16 mm

O-rings: Top and bottom, 14.5 mm

Resistance: 14.2 Ohms

Item Condition:
All of the Fiveomotorsport fuel injectors are shipped in brand-new condition unless otherwise stated as reconditioned or take-out injectors. All fuel injectors are covered by our warranty outlined below, unless otherwise stated.
Fiveo's Exclusive Warranty:
We stand behind all of our products with our 36 month/unlimited miles warranty. Within 14 days of your purchase date if you are not 100% satisfied, we will refund your purchase price for returned unused fuel injectors in their original packaging, minus shipping costs and up to a 15% restocking fee. If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector. You pay only the shipping costs. (Some racing applications may void this warranty).
Shipping and Handling Time:
All orders received by 2pm PST Monday-Friday will ship the same day. Orders received after 2pm on Friday will ship the following Monday. It is the buyer's responsibility to pay all customs fees, duties, import taxes, and related charges.
Average delivery times are listed below:
USPS priority mail – 3 business days
USPS Express International – 5 to 8 business days
FedEx Overnight
FedEx 2-Day

You are purchasing a custom mianufactured Fiveo "Asphalt Series" high performance 450cc/min fuel injector.. FIT: U.S. Domestic, European (EV1) Note:...
Read More

You are purchasing a custom mianufactured Fiveo "Asphalt Series" high performance 450cc/min fuel injector..

• FIT: U.S. Domestic, European (EV1)
• Note: List price includes One (1) fuel injector and one (1) EV1 connector pigtail
• You receive a complete fuel injector - ready to install in your modified engine - complete with all Viton rubber 12 mm oring and 16 mm rubber seal.
• EV1 electrical connector included with each injector.

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual dynamic and static flow rates at 3, 3.5, and 4 BAR at 25%, 50% and 100% for each injector, along with a complete dead time (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The test was performed at varying temperatures to achieve realistic results.

This is a modified fuel injector. We custom manufacture brand new Japanese-made fuel injector cores in large-quantity batches to achieve the highest quality product.

Fitment: Import highly modified engines.

Flow Rate: 450cc/min at 43.5 PSI
Very fast pulse rates and dead times. (Complete data sent with each set).
Sample Dead time (offset): 0.400 ms at 14 volts

Minimum Pulse Width: 1.5 ms

Resistance: 3.2 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Amperage: 1.0 Amps

High duty cycle with a recovery time of only 1.5 ms

Excellent atomization for medium compression, single-and multi-valve engines.

Will not require more than 1% trim

Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)

Surface finish: Green top, bodies are painted black to prevent oxidation.

Easy tuning and accurate compensations.

Item Condition:
All of the Fiveomotorsport fuel injectors are shipped in brand-new condition unless otherwise stated as reconditioned or take-out injectors. All fuel injectors are covered by our warranty outlined below, unless otherwise stated.
Fiveo's Exclusive Warranty:
We stand behind all of our products with our 36 month/unlimited miles warranty. Within 14 days of your purchase date if you are not 100% satisfied, we will refund your purchase price for returned unused fuel injectors in their original packaging, minus shipping costs and up to a 15% restocking fee. If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector. You pay only the shipping costs. (Some racing applications may void this warranty).
Shipping and Handling Time:
All orders received by 2pm PST Monday-Friday will ship the same day. Orders received after 2pm on Friday will ship the following Monday. It is the buyer's responsibility to pay all customs fees, duties, import taxes, and related charges.
Average delivery times are listed below:
USPS priority mail – 3 business days
USPS Express International – 5 to 8 business days
FedEx Overnight
FedEx 2-Day

This 45 lbs/hr fuel injector features a cone spray pattern, and very tiny droplets for maximum fuel atomization.Genuine Siemens Deka fuel injectors...
Read More

This 45 lbs/hr fuel injector features a cone spray pattern, and very tiny droplets for maximum fuel atomization.
Genuine Siemens Deka fuel injectors direct from the Siemens factory.

• Fuel injectors are sold in sets of 4 with and without Electrical Connector Adapters - See Photos.
• USE THIS INJECTOR FOR SUPERCHARGED V8 WITH 500-550 BHP.

 Injector type: EV6 Standard length, saturated
Coil Resistance: 12 Ohms, works with most modern ECU/PCM drivers
Spray: Cone, 20 degrees, very tiny droplets for maximum atomization. Watch Video.
Electrical Connector: USCAR
O-rings: 14mm Viton upper, lower

Static Flow Rate: Watch our videos. We picked a random set of 4 injectors and ran them through a complete set of tests.
Our tech did a static test for 10 sec. at 43.5 PSI with the results listed below.
Injector 1: 81.1 ml = 470.8 cc/min
Injector 2: 80.0 ml = 470.0 cc/min
Injector 3: 79.4 ml = 466.4 cc/min
Injector 4: 79.8 ml = 468.8 cc/min
This set is matched to within a differential of only 4 cc/min or less than 1.0%.
This is excellent for an off-the-shelf fuel injector. But typical of Siemens high-degree of quality control.

Dynamic Flow Rates:
2.5 ms PW @ 100Hz: 11.4 mg/pulse

Applications:
Dodge/Chrysler SRT-4
Mini Cooper Supercharged, Upgrade.

Cross Reference Part numbers:
04891574AB, 68051554AA
Siemens - FI11351, FI11354

44lbs/hr, Siemens Deka Fuel Injectors FI-114357, 108357Long-style fuel injector with USCAR electrical connectorFuel Nozzle: 2-hole split cone spray...
Read More

44lbs/hr, Siemens Deka Fuel Injectors FI-114357, 108357
Long-style fuel injector with USCAR electrical connector
Fuel Nozzle: 2-hole split cone spray pattern

This Denso injector is a Fiveomotorsport exclusive - You are purchasing a BRAND NEW custom manufactured Denso flow-matched 47lbs/hr fuel...
Read More

This Denso injector is a Fiveomotorsport exclusive -
You are purchasing a BRAND NEW custom manufactured Denso flow-matched 47lbs/hr fuel injectors -

• Single pintle
• Saturated - 14.5 OHMS
  
• "Steelies" - can be threaded

LIST PRICE IS FOR 1, FUEL INJECTOR - PURCHASE MULTIPLE INJECTORS AND RECEIVE A MATCHED SET.

Our injector is a better choice for most modders and tuners.
FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product. Our injectors are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices. Customers should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time. It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector. This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.

Part number: F87EUS480
Flow Rate: 
45 lbs/hr, 485 cc/min at 43.5 PSI (3 BAR)
(Complete flow specs provided with each set).
Resistance: 14.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: 1.5 Amps
Pressure: Min. 36 PSI (2.5 bar),  Max. 101 PSI (7 bar) 
All 14.5mm O-rings Included for installation. 

Item Condition:
All of the Fiveomotorsport fuel injectors are shipped in brand-new condition unless otherwise stated as reconditioned or take-out injectors. All fuel injectors are covered by our warranty outlined below, unless otherwise stated.
Fiveo's Exclusive Warranty:
We stand behind all of our products with our 36 month/unlimited miles warranty.  Within 7 days of your purchase date if you are not 100% satisfied, we will refund your purchase price for returned unused fuel injectors in their original packaging, minus shipping costs and up to a 15% restocking fee.  If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector.  You pay only the shipping costs. (Some racing applications may void this warranty).
Shipping and Handling Time:
All orders received by 2pm PST Monday-Friday will ship the same day.  Orders received after 2pm on Friday will ship the following Monday.  It is the buyer's responsibility to pay all customs fees, duties, import taxes, and related charges. 

Average delivery times are listed below:
USPS priority mail – 3 business days
USPS Express International – 5 to 8 business days
FedEx Overnight
FedEx 2-Day

.

550-565 BHP -- USE THIS SET OF FUEL INJECTORS FOR HIGHLY MODIFIED V-8 ENGINES.This fuel injector set has been carefully matched for an exact engine.
Read More

550-565 BHP -- USE THIS SET OF FUEL INJECTORS FOR HIGHLY MODIFIED V-8 ENGINES.
This fuel injector set has been carefully matched for an exact engine.

• Street-driven, daily-driver, running pump gas - 91-93 octane or race gas, E85.
  
  
• Stock-like IDLE QUALITY obtainable with proper tuning.
  
  
• Use for up to 565 BHP (BRAKE-SPECIFIC HORSEPOWER).

Fiveo Custom set of 47lbs/hr, 490cc/min EV6 New Generation, flow-matched Design-III fuel injectors.
Meets or exceeds all requirements for U.S. Spec vehicles:
Chevrolet LS6
Dodge/Chrysler: 4.7L, 5.7L
Ford 4.6L, Coyote 5.0L, 5.4L

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual dynamic and static flow rates at 3, 3.5, and 4 BAR at 25%, 50% and 100% for each injector, along with a complete dead time (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

Fiveo believes our injector to be a better choice for most modders and tuners.
Our injectors are custom-manufactured to exact specifications from brand new American-made fuel injector "cores" in large-quantity batches to achieve the highest quality product.
The resulting sets are all-fuels rated; including pump gasoline and race gas (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are sealed and placed in matched sets ready for shipping.

Injector Body Design: EV6, long
Injector type: Saturated

Fuel Nozzle: Single-hole disc w/diffuser plate, maximum atomization - WATCH VIDEOS.
1. Pulse Test: 2.5 ms at 5400 rpm and 43.5 PSI
2. Idle Test: 16 ms at 900 rpm and 43.5 PSI

Flow rate:
47 lbs/hr at 43.5 PSI
Dead time (latency): 0.75 ms at 14 volts
Minimum pulse width: 1.6 ms
Electrical connector type: U.S. CAR
Overall Length: 2.95 in./75.5 mm
O-ring to o-ring Length: 2.50 in./64.0 mm
Diameter: .60 in./16.25 mm
O-rings: Viton, Top and bottom, .55 in./14.50 mm
Resistance: 14.5 Ohms
(All fuel injector specifications meet or exceed the manufacturer's specification standard).

LIST PRICE INCLUDES A SINGLE (1) FUEL INJECTORThis 47lb Bosch fuel injectors is available from Fiveomotorsport in these configurations:Injector...
Read More

LIST PRICE INCLUDES A SINGLE (1) FUEL INJECTOR

This 47lb Bosch fuel injectors is available from Fiveomotorsport in these configurations:

Injector only,69.95
Injector with Pigtail,72.95
Injector with wireless PnP adapter,74.95
US/Euro Long Fit,74.95
Asian Import Long fit with Pigtail,77.95
Subaru WRX fit with Pigtail,77.95
Honda F Series with Pigtail,79.95
Honda B-D-H Series with Pigtail,79.95
Honda K Series with Pigtail,72.95
Injector with 6 mm nozzle extender and Pigtail,75.00

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product. 

Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flow tested and inscribed with a control number.
Flow data is recorded for each individual injector. The fuel injectors are then grouped into flow-matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.

575-600 BHP -- USE THIS SET OF FUEL INJECTORS FOR HIGHLY MODIFIED V-8 ENGINES.This fuel injector set has been carefully matched for an exact engine.
Read More

575-600 BHP -- USE THIS SET OF FUEL INJECTORS FOR HIGHLY MODIFIED V-8 ENGINES.
This fuel injector set has been carefully matched for an exact engine.

• Use with Screw- or Roots-type Superchargers; ProCharger, Whipple, Vortec, etc.
• Street-driven, daily-driver, running pump gas - 91-93 octane or race gas, E85.
• Stock-like IDLE QUALITY obtainable with proper tuning.
• Use for up to 600 BHP (BRAKE-SPECIFIC HORSEPOWER).

• SIX-HOLE FUEL NOZZLE - MAXIMUM ATOMIZATION - WATCH VIDEO.

Fiveo custom fits this (unmodified) Bosch 50lbs/hr, 530cc/min EV14 new generation fuel injector for the vehicles listed below.
Meets or exceeds all requirements for U.S. Spec vehicles:
Chevrolet LS6
Dodge/Chrysler: 4.7L, 5.7L
Ford 4.6L, Coyote 5.0L, 5.4L

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintenance, but not essential, for stainless steel based fuel injectors.

SPECIFICATIONS:
FIVEO P'N: 117US500X12
Body Design: EV14, Composite plastic w/internal filter
Injector type: Saturated
Fuel Nozzle: 6-hole disc - max atomization
Tested static flow rate: (All tests conducted using the industry standard Heptane).
530 cc/min, 50.5 lbs/hr at 43.5 psi. (3.0 bar)
(Video shows a still shot of our 30 second static test. The graduated cylinder is filled to 267.5 ml x 2 = 536cc/min
(Complete Static and Dynamic flow data tables are delivered with each set).
Sample Latency (Dead Time): 0.600 ms at 14 volts
(Complete Latency table showing values from 8-18 volts with each set).

DIMENSIONS:
Length: 2.9 inches, 72 mm
Diameter: 0.6 inches, 15.25 mm
O-rings: Viton, upper, lower, 14.5mm
Resistance: 12.7-13.1 Ohms

Item Condition:
All of the Fiveomotorsport products are shipped in brand-new condition unless otherwise stated and covered by our warranty outlined below.

Fiveo's Exclusive Guarantee:
We stand behind all of our products with our 36 months/unlimited miles warranty.  If you are not 100% satisfied, we will refund your purchase price for returned fuel injectors in their original packaging.  If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector.  You pay only the shipping cost (some racing applications may void this warranty).
Fiveomotorsport has been a proven seller on eBay since we established in 2000, and we have received over 5000 Positive Feedback replies from satisfied customers.  We are fuel injector experts—email us with your questions.
Shipping and Handling Time:
All orders received by 2pm PST Monday-Friday will ship the same day.  Orders received after 2pm on Friday will ship the following Monday.  Average delivery times are listed below:
USPS priority mail – 3-4 business days
USPS Express International – 5-8 business days
FedEx Overnight
FedEx 2-Day

Bosch EV14 Standard Length: FUEL INJECTOR WITH 6-HOLE FUEL NOZZLE - MAXIMUM ATOMIZATION - WATCH VIDEO. 525 cc/min (51.2 lbs) EV14 6-hole STANDARD...
Read More

Bosch EV14 Standard Length: FUEL INJECTOR WITH 6-HOLE FUEL NOZZLE - MAXIMUM ATOMIZATION - WATCH VIDEO.

• 525 cc/min (51.2 lbs) EV14
• 6-hole STANDARD Length; 2.5 in Fuel Injectors
• Choose your Fit:
• US/Euro - 14mm fuel rail bore
• Asian Import - machined top for 11mm fuel rail bore
• LIST PRICE INCLUDES: ONE (1) - FUEL INJECTOR
• All-fuels rated, including gasoline / MTBE / Ethanol blends / E-85
• Matching electrical connector pigtails sold separately, if needed click here.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintenance, but not essential, for stainless steel based fuel injectors.

High resistance, no inline resistors or resistor box required for use.

All New Generation Bosch EV14 fuel injectors will function at rail pressures in excess of 101 PSI, 7 bar.
Will maintain consistency to within 1%.

Minimum Pulse Width: 1.5 ms

SPECIFICATIONS:
FIVEO Part Number: 117U525
Body Design: EV14, Composite plastic w/internal filter
Injector type: Saturated
Fuel Nozzle: 6-hole disc - max atomization
Tested static flow rate: (All tests conducted using the industry standard Heptane).
515-530 cc/min, 50.5-51.4 lbs/hr at 43.5 psi. (3.0 bar)
(Video shows a still shot of our 30 second static test. The graduated cylinder is filled to 267.5 ml x 2 = 536cc/min
(Complete Static and Dynamic flow data tables are delivered with each set).
Sample Latency (Dead Time): 0.600 ms at 14 volts
(Complete Latency table showing values from 8-18 volts with each set).

DIMENSIONS:
Length: 2.5 inches, 65 mm
O-rings: Viton, upper, lower, 14.5mm
Resistance: 12.7-13.1 Ohms, High-Impedance

Electrical connector type: U.S. CAR (EV6)

M-Series Black-Ops M52 550cc/min, 52lbs/hrPRICE REDUCTION: NEW LOWER PRICEUSE THIS INJECTOR FOR HIGHLY MODIFIED ENGINES ONLY. M-Series...
Read More

M-Series Black-Ops M52 550cc/min, 52lbs/hr

PRICE REDUCTION: NEW LOWER PRICE
USE THIS INJECTOR FOR HIGHLY MODIFIED ENGINES ONLY.

• M-Series custom flow-matched 52lbs/hr, 550cc/min, high flowing fuel injectors.
• Delivered in flow-balanced sets
• Price listed is for a single injector

Use for super street or racing, single or multi-valve, normally aspirated or forced-air induction engine applications:

Our injectors are custom-manufactured from brand new American-made fuel injector "cores" in large-quantity batches to achieve the highest quality product. The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then hermetically-sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintainance, but not essential, for stainless steel based fuel injectors.

The test was performed at varying temperatures to achieve realistic results.Our injectors are custom-manufactured from brand new American-made fuel injector "cores" in large-quantity batches to achieve the highest quality product. The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.

This is a high performance, high volume fuel injector.
The fuel delivery is from a single-hole, ball/disc fuel nozzle.
Wide cone-shape spray pattern for maximum fuel atomization.

Body Design: Composite plastic

Injector type: M-Series, saturated

Flow rate:

550 cc/min 3.0 BAR, 52 lbs/hr at 43.5 psi.

600 cc/min 3.5 BAR, 57 lbs/hr at 50.8 psi.

655 cc/min 4.0 BAR, 62 lbs/hr at 58.0 psi.

Length: 2.3/8 inches, 64 mm

Diameter: 9/16 inches, 14 mm

Orings: Top and bottom, 14.5 mm

Resistance: 12.5 Ohms

Electrical connector type: USCAR

USE FOR HIGHLY MODIFIED ENGINE - CAN BE USED WITH STOCK FUEL RAIL, FUEL PUMP AND ECU LIST PRICE INCLUDES - 1, FUEL INJECTOR W/O-RINGS Choose 52lb or...
Read More

USE FOR HIGHLY MODIFIED ENGINE - CAN BE USED WITH STOCK FUEL RAIL, FUEL PUMP AND ECU

• LIST PRICE INCLUDES - 1, FUEL INJECTOR W/O-RINGS
  
  
• Choose 52lb or 55lb flow rate
  
• FLOW-MATCHED SETS Available
  
  
• This Denso fuel injector is a Fiveomotorsport exclusive
  
  
• You are purchasing a BRAND NEW custom manufactured Denso.

• Denso "STEELIES" - Can be threaded

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product. Our injectors are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices. Customers should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time. It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector. This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.