BMW S62, S65, S85, Porsche 911, Mercedes AMG and VW

Fits: M-B, Mercedes-AMG*, BMW Z4 S85; S62, S65 4.0L V8; M54, Audi, Porsche 911, VW, R32,

• EXTENDED FUEL NOZZLE - Mimics OE fuel injector
• Many flow-rates available (see drop-down menu)
  25lb/276cc (OEM 5.0L); 36lb/370cc; 60lb/630cc; 72lb/750cc; 95lb/1000cc; 114lb/1200cc
• Jetronic Electrical Connector - Direct fit - No rewiring required
• Does not require an adapter
• Price listed is for a single (1) fuel injector
• SETS are delivered documented and flow-matched
• Professional tuning for optimized engine performance is recommended

*NOTE: Some vehicle installations will require a connector replacement (see menu options)

FLOW CHART:  delivered with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

E85 Fuel usage - Because of the high-H2O levels, ethanol will not rust but tends to "dry" the orifices in stainless-steel constructed fuel injectors. Customers should beware that this can be a problem with some fuel injectors and may cause a "sticking" problem. Periodic lubrication is recommended if your engine will be left without starting/running for extended periods - weeks to months - at a time.

Injector type: EV14 STANDARD LENGTH with EXTENDED NOZZLE, with internal filter

Resistance: 12.8 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Pressure: Min. 36 PSI (2.5 bar), Max. 130 PSI (9 bar)
Surface finish: Black composite
Connector: EV-1, Minitimer
All new 14.5 mm Viton o-rings Included for installation