80lbs/hr - Siemens EV1-Honda B-D-H-Series, CUSTOM, FLOW-MATCHED
Siemens/FIVEO
Part Number:
110324B/Pigtails, 110324B/Adapters - 80lb
Resistance:
14 Ohms
$69.50 (USD)
This 830cc Siemens 110324 fuel injector is custom fitted to fit your stock fuel rail and intake
- All new Viton o-rings/seals Included for installation
- Electrical connector pigtails included (see photos)
- Use for Honda engines with turbocharged horsepower
- Use for super street or racing applications
- COMPLETE LATENCY TABLE AVAILABLE UPON REQUEST
830cc/80lb, Siemens Mototron Deka IV.
Use in highly-modified super-steet and racing engines.
WE CHARGE A LITTLE MORE BECAUSE OURS ARE WORTH A LOT MORE!
Our 110324, FI-114992 80lb fuel injectors are individually tested and matched against each other.
Then placed in matched sets.
You receive documented results of our tests.
DATA SHEETS INCLUDE: Each set, whether it be just 2 or 12, is sold with a complete flow-data chart indicating individual dynamic and static flow rates at 3, 3.5, and 4 BAR at 15%, 50% and 100% for each injector, along with a complete dead time (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results - Linear tuning with excellent low-end, and idle rpm.
Flow Rates:
830cc/min, 80lbs/hr at 43.5 PSI (3 BAR), 885cc/min, 84lbs/hr at 50 PSI (3.5 BAR), 950cc/min, 90lbs/hr at 50 PSI (3.5 BAR)
Mfg. flow matched to within 1-2%
Excellent for superstreet and racing applications.
Resistance: 12.5-14.8 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: 1.0 Amps
Sample latency time: 0.714 ms at 14 volts
Minimum Pulse Rate: 1.8 ms
Excellent atomization for medium compression, single-
and multi-valve engines.
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
Surface finish: black composite
Manufacturer | Siemens/FIVEO |
---|---|
Impedance | 14 Ohms |
Part Number | 110324B/Pigtails, 110324B/Adapters - 80lb |