FiveoMotorsport / Bosch
026Ux; Seadoo, iControl, EV-14, Bosch, 7-Flow Rates, Matched
Use this injector for highly modified Sea Doo iControl engines.
- Drop-in fitment: Direct fit using stock fuel rail/intake/electrical connection.
LIST PRICE INCLUDES a single (1) fuel injector - Order three (3) and receive a matched set.
FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.
Injector type: EV14 with internal filters, composite plastic, saturated
Electrical connector: Sumitomo
Overall length: 77 mm
O-ring to O-ring on Center: 64 mm
Body Diameter: 15 mm
Tested Resistance: 12.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min. 36 PSI (2.5 bar), Max. 145 PSI (10 bar)
Excellent fuel atomization - Excellent linearity
Low end pulse width accurate to within 1% down to 2ms.
All 14.5 Viton O-rings Included for installation.
|Manufacturer||FiveoMotorsport / Bosch|
|OEM or Aftermarket||High Performance|
|Part Number||SeaDoo iControl Varied Flow Rates|
Write Your Own Review