Fiveo Black Ops; Cadillac, Chevy, GMC, Hummer; 4.8L, 5.3L, 6.0L

Black-Ops M-Series Fuel Injectors

• Chevrolet, GMC, Cadillac, Escalade, Tahoe, Silverado, Sierra 4.8L, 5.3L, 6.0L
• OEM, Stock and modified engines

For OEM stock engine replacement use P/N: M26 280cc

All flow rates ranging from 315cc up are meant for MODIFIED ENGINES ONLY: Requires tuning/timing/CPU upgrade - USE FOR STAGE 1, STAGE 2 OR STAGE 3 UPGRADES

• LIST PRICES INCLUDE: ONE (1) FUEL INJECTOR - (NO electrical connectors/adapters required).
• FITS OEM HARNESS, FUEL RAIL, AND INTAKE MANIFOLD

Made in The United States of America

• ULTRA FAST RESPONSE TIMES
• LINEAR PERFORMANCE EVEN AT VERY LOW PULSE WIDTHS
• LOW DEAD-TIMES ACROSS THE OPERATING VOLTAGE RANGE
• COMPATIBLE WITH ALL PERFORMANCE FUELS: E85, Methanol, etc.
  
• ALL STAINLESS STEEL INTERNAL CONSTRUCTION

Built with a robust internal coil design that delivers ultra-fast response time, great idle and lots of high-end power. Extremely reliable up to 95% duty cycle (note: if you are running above 90% duty cycle, it is better to move up to the next size flow-rate fuel injector).

Fuel Injector Specifications:
Coil Resistance: 12.5 OHMS (high-impedance)
When ordered  in sets:  Flow-Matched sets are delivered in flow rates at or very near the advertised flow rate (you will get a set that is exactly flow-matched to within a best-in-the-business 0.5-1.0% -- guaranteed).

With your order you will receive a complete flow-data-sheet showing actual tested flow rates for your individual injectors (see photos).
Data sheet includes static flow data at 3 Bar (43.5 psi), 3.5 Bar (50.8 psi) and 4 Bar (58.0 psi). Black-Ops injectors can operate at 100+ psi.
Data sheet includes dynamic flow data at 3 Bar at 6000 rpm and 5.0 ms and idle data at 800 rpm and 1.5 ms

Also included: Full latency (dead-time) table from 8 volts to 18 volts at 3 Bar, 13.5 volts, nominal

Injector Dimensions:

Electrical connector type: USCAR
Overall length: 53 mm - 2.12 in
Body Diameter: 17 mm - 0.70 in
O-ring to o-ring, on center: 45 mm - 1.7 in
Upper o-ring diameter: 14.5 mm
Lower o-ring diameter: 14.5 mm
O-ring material: Viton