62lbs/hr, EV14

Brand-new, high-performance, custom flow-matched, fuel injectors for the 6.2L, LSA, LS3, LS7, LS9 engine.

LIST PRICE: 1 (ONE) FUEL INJECTOR - No adapter needed for installation.

• Custom milled to the higher flow rate from genuine American-made injectors
• All O-rings supplied for installation
• Detailed custom flow data sheet included for easy tuning
• 650cc/min, 62lb/hr, high-flowing fuel injector set
• SUPER ATOMIZER NOZZLE -  WATCH VIDEO

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual dynamic and static flow rates at 3, 3.5, and 4 BAR at 15%, 50% and 100% for each injector, along with a complete dead time (latency) table. Flow matching was done with industry-standard equipment of the highest quality. The test was performed at varying temperatures to achieve realistic results.

Our injector is a better choice for most modders and tuners.
Custom-manufactured from brand new American-made fuel injector "cores" in large-quantity batches to achieve the highest quality product. The resulting sets are FLEX or all-fuels rated; including all gasolines - oxygenated 102-120 octane (MTBE), E100, E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then carefully selected into matched sets ready for shipping.

Injector type: Saturated, internal filter
Nozzle: Single-hole disc w/diffuser plate

Sample Latency (dead time): 0.850 ms at 14 volts. Complete dead time table ships with each set.
Resistance: 12.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Pressure: Min. 36 PSI (2.5 bar), Max. 145 PSI (10 BAR)
Surface finish: Black composite
All Viton o-rings Included for installation.