Bosch, 1000cc, Hayabusa, GSXR1300, S2000 Honda

• 1 - Brand new EV14 1000cc/min Fuel Injector
  
  
• Purchasing a matched set guarantees a unique flow charts with latency tables.

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product.
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flowed and inscribed with a control number.
Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.

Flow rates:
This set is flow matched to within 0.7 to 1.5%
We use the industry standard Heptane as our testing agent.
1000 cc/min at 43.5 psi (3 bar)
1090 cc/min at 50.8 psi (3.5 bar)
1180 cc/min at 58.0 psi (4 bar)

Dead Time: 0.75 ms at 14 Volts
This injector will function at rail pressures in excess of 101 psi, 7 bar.
Excellent low pulse width response with predictable response down to 1.8 ms.
Excellent atomization for modern multi-valve engines.
Application: Super-street and racing engines.
Fuel Delivery: Single-hole, modified disc
Electrical Connector: EV6, (U.S. CAR)
Spray type: wide cone, maximum atomization

Overall injector length: 64 mm

Injector diameter: 16 mm
Oring/Seal: Viton - Top: 11.5 mm, Bottom: 22 mm
Fuel types: All types of gasoline, Methanol, E85, E25, E10