Black-Ops M-Series, Compact; Harley-Davidson; GM LS3/LS7/LS9/LSA
Fiveo Motorsport introduces the "Black-Ops, M-Series" High-Performance, Flow-Matched Fuel Injectors (see complete details and specifications below).
After several years of R&D and after testing many different injector core/body configurations, Fiveomotorsport is releasing the new Black-Ops M-Series Fuel Injectors for sale for the street-performance, racing, and all high-performance GM LS engines.
- LIST PRICES INCLUDE: ONE (1) FUEL INJECTOR - (Electrical connectors/adapters not needed).
- Available in flow-rates from 52 lbs to 150 lbs (550cc-1600cc) at 43.5 PSI; 3 Bar.
- Price shown is for a single injector with selected adapter (see drop-down menu for pricing).
- Order multiple injectors. - Always delivered in flow-matched sets with data sheet.
- Made in The United States of America
- ULTRA FAST RESPONSE TIMES
- CONSISTENT EVEN AT VERY LOW PULSE WIDTHS
- LOW DEAD-TIMES ACROSS THE OPERATING VOLTAGE RANGE
- COMPATIBLE WITH ALL PERFORMANCE FUELS, E85, Methanol
- ALL STAINLESS STEEL INTERNAL PARTS
- NEW: 1300cc Flow Rate Available.
Built with a robust internal coil design that delivers ultra-fast response time, great idle and lots of high-end power. Extremely reliable up to 95% duty cycle (note: if you are running above 90% duty cycle, it is better to move up to a higher-flowing fuel injector).
Similar injectors have been used as OE injectors proving their durability and consistency -- partly due to the new larger insulated coil.
Notice the 17 mm body diameter (see photos) - approximately 2 mm larger than a standard Bosch EV14 injector.
Fiveomotorsport is able to guarantee flow-matched sets from 2 to 12 injectors matched both statically and dynamically to within 0.5-1.0%.
Fuel Injector Specifications:
Fuel Delivery: New single-hole ball valve (for maximum fuel atomization).
Coil Resistance: 12.5 OHMS (high-impedance)
Flow-Matched sets are delivered in flow rates at or very near the advertised flow rate (you will get a set that is exactly flow-matched to within a best-in-the-business 0.5-1.0% -- guaranteed).
Minimum Pulse Width: 1.4 ms
With your order you will receive a complete flow-data-sheet showing actual tested flow rates for your individual injectors (see photos).
Data sheet includes static flow data at 3 Bar (43.5 psi), 3.5 Bar (50.8 psi) and 4 Bar (58.0 psi). Black-Ops injectors can operate at 100+ psi.
Data sheet includes dynamic flow data at 3 Bar at 6000 rpm and 5.0 ms and idle data at 800 rpm and 1.5 ms
- Also included: Full latency (dead-time) table from 8 volts to 18 volts at 3 Bar
Electrical connector type: USCAR
Overall length: 53 mm - 2.12 in
Body Diameter: 17 mm - 0.70 in
O-ring to o-ring, on center: 37.5 mm - 1.5 in
Upper o-ring diameter: 14.5 mm
Lower o-ring diameter: 14.5 mm
O-ring material: Viton
|OEM or Aftermarket||High Performance|
|Part Number||Black-Ops: Compact, GM, LSA, LS3, LS7, LS9|
|Make||CADILLAC, CHEVROLET, PONTIAC|
|Model||CAMARO, CORVETTE, CTS, GTO|
|Engine||427 LIMITED EDITION Z06, V8, 7.0L, E, GAS, SS, V8, 6.2L, LS3, W, GAS, V, V8, 6.2L, LSA, P, Super, GAS, V8 6.2L 376CID, V8 7.0L 427CID, V8, 6.0L, U, GAS, V8, 6.2L, LS3, W, GAS, Z06, V8, 7.0L, E, GAS, ZR1, V8, 6.2L, LS9, R, Super, GAS, SS, V8, 6.2L, L99, J, GAS|
Write Your Own Review