1000cc and 1150cc EV1, Pintle Fuel Nozzle, Flow Matched HIGH-IMPEDANCE, Fuel Injectors

Fiveomotorsport, custom flow-matched, 96 lbs/hr, 1000 cc/min, high-flowing fuel injectors

• High-impedance - 12.5 OHMS
• Price listed is for a single injector.
• Multiple injectors ordered are delivered in flow-matched sets with a test data sheet.
• These injectors are Made in U.S.A. and backed by our best-in-the-business warranty.
• Also available in 105 lbs/hr, 1150 cc/min, flow rate (see drop-down menu for options).

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product. Our injectors are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are individually flow tested at multiple pulse-widths and inscribed with a control number. Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individually tested static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices. Customers should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time. It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector. This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.

Fuel Delivery: Single-hole Pintle, 12-30 Degree Spray Pattern - Watch Video.

Electrical Connector: EV1/Jetronic

Spray type: single-pintle, wide cone, maximum fuel atomization

Length: 3 inches, 74 mm

Length, o-ring to o-ring: 64 mm

Body Diameter: 24 mm

O-rings: Top and bottom, 14.5 mm

Resistance: 12.5 Ohms

Fuel types: Gasoline, Methanol, Ethanol: E100, E85, E25, E10