Arctic Cat Thundercat Fuel Injectors from 450cc up to 830cc

LIST PRICE Includes: One (1) Fuel Injector and One (1) Plug n' Play Connector Adapter

233US / 13mm Seal: Arctic Cat Thundercat, 180hp 3-Cyl -
Stock flow rate: 400cc (approximately) Will handle maximum 185 horsepower, naturally aspirated.
450cc: Max 207 hp, naturally aspirated
530cc: Max 242 hp, naturally aspirated
630cc: Max 240 hp, Turbocharged
750cc: Max 284 hp, Turbocharged
830cc: Max 315 hp, Turbocharged

Have over 315 horsepower? ...Call for fuel injector recommendation.

Ready to install - Plug 'n' Play!

• Get the latest in fuel injector technology with this custom Bosch EV14 injector
• Ultra fast pulse rates, superior fuel atomization, and easy tuning
• New o-rings/seals supplied for installation

FLOW CHART:   Sets are sold with a complete flow-data chart indicating individual dynamic and static flow rates at 3.0, 3.5, and 4.0 BAR at 15%, 50% and 100% for each injector, along with complete dead time (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
Individual sets may flow differently than this set.
But no set will ever vary more than +/- 0.5-0.75%

You don't get this kind of technology from an OE injector.

Indisputable facts about Fiveomotorsport fuel injectors:
Fiveo offers custom, balanced and flow-matched EV14 fuel injectors that we guarantee to dynamically flow a true 530cc/50lbs.
Fiveo EV14 injectors are delivered with custom, individual flow-sheets. Each injector Fiveo sells is inscribed with a control number.
Those control numbers are shown on the flow sheet that is sent to you with your set.
Final word: We deliver a solid, dependable, easy to tune product.

This is a high performance, high volume fuel injector.
The fuel delivery is from a single-hole, modified disc with difuser plate that delivers a medium-wide cone-shape spray pattern for maximum fuel atomization.

Body Design: Composite plastic, black
Injector type: Top feed, saturated

Sample dead time (latency): 530cc - 0.780ms at 14 volts (Complete table included with each set)
Overall Length: 2.0 inches, 50 mm.  O-ring to O-ring length:  1.5 inches, 38 mm
Body Diameter: 0.63 inches, 16 mm
O-rings: Viton, upper o-ring is 14.5 mm diameter, lower seal is 13.0 mm diameter
Resistance: 12.5 Ohms
Electrical connector type: USCAR