026M-550cc, WRX, Protege, Eclipse 4G64, ATV, CBR1000, FZS
Part Number: 026M550, 550cc
This is a high-performance upgrade injector for modified engines only
- EV14 style, 550 cc/min flow-rate injectors available in flow balanced sets
Will fit stock fuel rail/intake/electrical connection
Price is for single (1) fuel injector
FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product.
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flowed and inscribed with a control number.
Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.
FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.
SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.
Injector type: EV14, saturated
Electrical connector: Sumitomo (OE)
Latency (Dead Time): 0.75ms at 14 volts
Coil Resistance: 12.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min. 36 PSI (2.5 bar), Max. 145 PSI (10 bar)
Excellent fuel atomization - Excellent linearity
Low end pulse width accurate to within 1% down to 2ms.
This injector will not require more than 1% trim
Composition: Composite plastic, filterless
All 12mm and 16mm Viton O-rings Included for installation.
|OEM or Aftermarket||High Performance|
|Part Number||026M550, 550cc|
|Year(s)||2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016|
|Make||MAZDA, MITSUBISHI, SUBARU|
|Model||ECLIPSE, GALANT, IMPREZA, PROTEGE, PROTEGE5|
|Engine||DE, L4, 2.4L, 4G69, F, GAS, DX, L4, 2.0L, GAS, ES, L4, 2.0L, GAS, ES, L4, 2.4L, 4G69, F, GAS, GS, L4, 2.4L, 4G64, G, GAS, GS, L4, 2.4L, 4G69, F, GAS, GT, V6, 3.0L, 6G72, H, GAS, GT, V6, 3.8L, T, GAS, GT-P, V6, 3.8L, T, GAS, GTS, V6, 3.0L, 6G72, H, GAS, GTS, V6, 3.0L, GAS, GTS, V6, 3.8L, 6G75, S, GAS, L4, 1.6L, GAS, L4, 2.0L, GAS, L4, 2.4L, 4G64, G, GAS, L4, 2.4L, 4G64, GAS, L4, 2.4L, GAS, LS, V6, 3.8L, 6G75, S, GAS, LX, L4, 2.0L, GAS, MAZDASPEED, L4, 2.0L, Turbo, GAS, MP3, L4, 2.0L, GAS, RALLIART, V6, 3.8L, 6G75, T, GAS, SE, L4, 1.6L, GAS, SE, L4, 2.4L, 4G69, F, GAS, SE, V6, 3.8L, T, GAS, SPORT EDITION, L4, 2.4L, 4G69, F, GAS, SPORT V6, V6, 3.8L, 6G75, S, GAS, SPYDER GS, L4, 2.4L, 4G64, G, GAS, SPYDER GS, L4, 2.4L, 4G69, F, GAS, SPYDER GT, V6, 3.0L, 6G72, H, GAS, SPYDER GT, V6, 3.8L, T, GAS, SPYDER GT-P, V6, 3.8L, T, GAS, SPYDER GTS, V6, 3.0L, 6G72, H, GAS, SPYDER, L4, 2.4L, 4G64, G, GAS, SPYDER, V6, 3.0L, 6G72, H, GAS, V6, 3.0L, 6G72, H, GAS, V6, 3.0L, GAS, V6, 3.0L, H, GAS, V6, 3.0L, L, GAS, V6, 3.8L, GAS, WRX LIMITED, H4, 2.5L, EJ255, Turbo, GAS, WRX STI, H4, 2.5L, EJ257, Turbo, GAS, WRX TR, H4, 2.5L, EJ255, Turbo, GAS, WRX, H4, 2.0L, EJ205, Turbo, GAS, WRX, H4, 2.5L, EJ255, Turbo, GAS|
Write Your Own Review