Bosch, 550cc/52lbs, Cadillac, Camaro, Corvette, LS3, LSA, LS7, LS9, L76

Brand new high performance, custom flow-matched 52lb/hr @ 43.5 PSI fuel injectors

• Use for 6.0L/6.2L LSA/LS3/LS7/L76/LS9 engines

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintenance, but not essential, for stainless steel based fuel injectors.

• Sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are sealed and placed in matched sets ready for shipping.

Injector type: Saturated w/internal filter with US CAR electrical connector
Injector dimensions:
Overall length: 50.5 mm/2.0 in
O-rings on center: 37.0 mm/1.5 in
Diameter: 15.2 mm/0.60 in
O-ring diameter: 14.5 mm/0.57 in

Tested Static Flow Rates: WATCH OUR PULSE TEST VIDEO.
550cc/min at 3.0 BAR (50lbs/43.5 PSI)
605cc/min at 3.5 BAR (55lbs/50.8 PSI)
655cc/min at 4.0 BAR (60lbs/58.0 PSI)
(Some slight variation in flow rate can be expected from set to set).

Resistance: 12.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Pressure: Min. 36 PSI (2.5 bar), Max. 130 PSI (9 BAR)

Surface finish: Black composite

All Viton o-rings Included for installation.