250+HP, Mini Cooper S Supercharged 1.6L, 450cc Injector

This 44 lbs/hr fuel injector features a cone spray pattern, and very tiny droplets for maximum fuel atomization.
Genuine Siemens Deka fuel injectors direct from the Siemens factory in the U.S.A.

• Fuel injectors are sold in sets of 4 with and without Electrical Connector Adapters - See Photos.
• USE THIS INJECTOR FOR SUPERCHARGED V8 WITH 500-550 BHP.

 Injector type: EV6 Standard length, saturated
Coil Resistance: 12 Ohms, works with most modern ECU/PCM drivers
Spray: Cone, 20 degrees, very tiny droplets for maximum atomization.
Electrical Connector: USCAR
O-rings: 14mm Viton upper, lower

Static Flow Rate: Watch our videos. We picked a random set of 4 injectors and ran them through a complete set of tests.
Our tech did a static test for 10 sec. at 43.5 PSI with the results listed below.
Injector 1: 81.1 ml = 470.8 cc/min
Injector 2: 80.0 ml = 470.0 cc/min
Injector 3: 79.4 ml = 466.4 cc/min
Injector 4: 79.8 ml = 468.8 cc/min
This set is matched to within a differential of only 4 cc/min or less than 1.0%.
This is excellent for an off-the-shelf fuel injector. But typical of Siemens high-degree of quality control.

Dynamic Flow Rates:
2.5 ms PW @ 100Hz: 11.4 mg/pulse

Applications:
Dodge/Chrysler SRT-4
Mini Cooper Supercharged, Upgrade.

Cross Reference Part numbers:
04891574AB, 68051554AA
Siemens - FI11351, FI11354