400cc/min - Custom flow matched 38lbs/hr; VW BMW Mini Audi Fuel Injectors

Custom Fiveo
Part Number: 796US400, 028US400 MINI S
$75.00

Use this injector for a modified engine.

You are purchasing a brand new - flow-matched, custom manufactured fuel injector for  Mini, Audi, VW Golf GTI, BMW, etc.

  • Listed price is per single fuel injector
  • Flow matched sets delivered when ordering multiple injectors

This injector is a 15% flow increase over stock for the Supercharged Mini Cooper.

(SEE COMPLETE APPLICATION LIST BELOW).

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual dynamic and static flow rates at 3, 3.5, and 4 BAR at 25%, 50% and 100% for each injector, along with dead time (latency) at 14 volts.
Flow matching was done with industry-standard equipment of the highest quality. The test was performed at varying temperatures to achieve realistic results.

You receive the highest quality fuel injectors for superstreet and racing applications.

As part of our quality control, each injector has been marked/inscribed by our technician with an individual

control number and is part of a unique flow-matched set.

Fiveomotorsport is a respected name in high performance and racing parts.

This Generation III composite fuel injector is better suited to the high pressures of modern engines over the old fused plastic/metal body injectors.

None of our customers have ever reported a blowout or failed coil even with pressures

exceeding 90 psi.

This fuel injector has excellent high and low pulse width response times.

These sets are very consistent and will require no more than 1% trim for easy tuning

with accurate compensation.

(See additional specs below).

Fiveo's Exclusive Guarantee:

If you ever have an injector go outside spec or fail for any reason when functioning within the manufacture's stated operating conditions, whether in a street or racing application, we will replace it with a brand new fuel injector. We will only ask that you pay the shipping.

You are purchasing a brand new high performance fuel injector set for:

Mini Cooper S;

Audi TT 1.8 (AWP), A4 1.8 (AMB), (AWM);

VW Golf/Jetta GTI 1.8 (AWP), (AWW);

BMW.

Part number: 796US400

Flow Rate: 400cc/min at 43.5 PSI

Flow Rate: 38LBS/HR at 43.5 PSI

Resistance: 12.8-14.5 Ohms

Overall length: 62 mm

Oring to oring: 52 mm

Voltage: 8-15 Volts, Nominal 13.5 Volts

Pressure: Min. 36 PSI (2.5 bar), Max. 130 PSI (9 bar)

Surface finish: Composite plastic

All O-rings Included for installation.

More Information
Manufacturer Custom Fiveo
Part Number 796US400, 028US400 MINI S
Make AUDI, BMW
Model A4, A4 QUATTRO, M3, TT, TT QUATTRO, Z3
Engine AVANT, L4, 1.8L, AMB, C, Turbo, GAS, AVANT, L4, 1.8L, AMB, Turbo, GAS, CABRIOLET, L4, 1.8L, AMB, Turbo, GAS, L4, 1.8L, AMB, C, Turbo, GAS, L4, 1.8L, AMB, Turbo, GAS, L4, 1.8L, AWP, C, Turbo, GAS, L4, 1.8L, AWP, Turbo, GAS, L4, 1.8L, AWP, X, Turbo, GAS, L6, 3.2L, S54, GAS, M COUPE, L6, 3.2L, S54, GAS, M ROADSTER, L6, 3.2L, S54, GAS
Write Your Own Review
You're reviewing:400cc/min - Custom flow matched 38lbs/hr; VW BMW Mini Audi Fuel Injectors
Your Rating