SET, 2000cc "Asphalt" 2.5 Ohms, Import Fit Fuel Injectors

You are purchasing a Fiveo Exclusive, custom fitted and flow-matched Fiveo "Asphalt Series" high performance, low-resistance 2000cc/min fuel injector with ultra-low reaction times (see tech information below) (Flow chart photo).

• This fuel injectors is for a highly modified engine with high horsepower.

• Listed price includes complete SET/4 fuel injectors with pigtails

• Sets delivered flow-matched with tuning data

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product. Our injectors are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices. Customers should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time. It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector. This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.

This Fiveo "Asphalt" 2000cc fuel injector set is custom fitted for all Nissan Skyline RB20, RB26DETT, Toyota Supra 7MGTE six cylinder engines, Mazda 4 cylinder, Mitsubishi Evo, Mazda RX-7 and many others.

(Can be used for more super street or racing applications).

SPECAIL NOTE:
We purchase the fuel nozzle pintle especially for this fuel injector. Our technician removes the original fuel nozzle pintle from the injector "blank" and replaces it with this high-flow one. The "new" injector is then tested and placed in a flow-matched set. Flow matching is labor intensive but the results insure a superior fuel injector set worthy of superstreet or racing applications.

Fiveo's Exclusive Guarantee: If you ever have an injector go outside spec or fail for any reason when functioning within the manufacturer's stated operating conditions, we will replace it with a brand new fuel injector. You are purchasing a flow-matched, high performance Fiveo fuel injector set.

Injector type: Peak and hold
Connector type: EV1 (Standard-Bosch type)
Rated for all fuels: Gasoline, E85, etc.
Tested Flow Rates:
There will be some slight variation in flow rates from set-to-set
2000cc/min at 3.0 BAR
2150cc/min at 3.5 BAR
2330cc/min at 4.0 BAR

Latency (Dead Time): 0.5 ms at 14 volts - Complete latency table with set.
Resistance: 2.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: Peak 4.0 Amps/ Hold 1.5 Amps
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
All Viton o-rings/seals included for installation.
Top o-ring: 12mm
Bottom seal: 16mm