Set - 1800cc EV1 - Asphalt B and D Series Honda, E85 Ready, 2.5 Ohms
Custom Fiveo
Part Number:
10399B1800 / Pigtail
Resistance:
2.5 Ohms
Connector Type:
Jetronic (EV1)
High Performance
$679.95 (USD)
This fuel injector has been custom fitted for all B and D Series Honda engines (see photos).
1800 cc EV1 - Asphalt B and D Series Honda, Low Impedance, Racing fuel injectors E85, Race Gas, High Octane
-
You also receive new 11mm O-rings and 22 mm seals for installation
Listed price includes (4) injectors and (4) electrical connector pigtails
-
Multiple injectors are delivered in flow-matched sets ready to install in your modified engine
-
Each set comes complete with its own individual custom flow-data chart
FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product. Our injectors are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.
FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.
Fitment: Honda 4 cylinder modified engines.
Flow Rates - (Special Note: Slight variations in flow will be seen from set-to-set but never more than 1.0% in any set).
1800cc/min at 3 BAR (43.5 PSI)
1960cc/min at 3.5 BAR (50.8 PSI)
2120cc/min at 4 BAR (58 PSI)
Latency (dead time): 0.70 ms at 14 volts
Tested Resistance: 2.5 Ohms
Voltage: 8-15 Volts, Nominal 14 Volts
Amperage: Peak 4.0 Amps/ Hold 1.5 Amps
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
Surface finish: Green Top/Black Enameled Steel
All Viton O-rings included for installation.
EV1 electrical connector pigtials included.
Easy tuning and accurate compensations.
All O-rings Included for installation.
EV1 electrical connector pigtails included.
Manufacturer | Custom Fiveo |
---|---|
OEM or Aftermarket | High Performance |
Connector Type | Jetronic (EV1) |
Impedance | 2.5 Ohms |
Part Number | 10399B1800 / Pigtail |