1600cc Asphalt Series, 2.5 Ohm, Import Fit Fuel Injectors

Custom fitted and flow-matched Fiveo "Asphalt Series" high performance 1600cc/min fuel injectors with ultra-low reaction times (see tech information below).

• Use for a highly modified engine with high horsepower.

• Listed price includes 1 injector and 1 electrical connector pigtail

• Multiple injectors are delivered in flow-matched sets

Our injectors are custom-milled from brand new American/German/Japanese-made fuel injector "cores" in large-quantity batches to achieve the highest quality product.
The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then hermetically-sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.

Use for imports with 12mm/16mm seals for fuel rail/intake.
You receive a complete set of fuel injectors and connector pigtails (See photos) - ready to install in your modified engine.

This Fiveo "Asphalt" 1600cc fuel injector set is custom fitted for all Nissan Skyline RB26DETT/Toyota Supra 7MGTE six cylinder engines, Mazda 4 cylinder, Mitsubishi Evo, Mazda RX-7 and many others.

(Can be used for more super street or racing applications).

Injector type: Peak and hold
Connector type: EV1 (Standard-Bosch type)
Tested Flow Rates:
(There will be some slight variation in flow rates from set-to-set, but never more than 1-2%).
1600cc/min at 3 BAR
1766cc/min at 3.5 BAR
1912cc/min at 4 BAR
2098cc/min at 5 BAR
Latency (Dead Time): 0.600 ms at 14 volts - Complete latency table with set.
Resistance: 2.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: Peak 4.0 Amps/ Hold 1.5 Amps
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
All Viton o-rings/seals included for installation.
Top o-ring: 12mm
Bottom seal: 16mm