026M-1600cc, Asian Imports, Toyota, Subaru, Mitsubishi

High-performance, high-impedance, flow-matched, Fiveomotorsport Asphalt 2, 1600cc/min fuel injectors for import car "standard" fitment - THIS 1600CC INJECTOR IS RATED: FLEX-FUEL COMPATIBLE.

• CHECK OUR COMPETITORS FUEL INJECTORS. THEY ARE SPECIFICALLY RATED FOR NATURAL GAS ONLY.

• List Price Includes: ONE (1) fuel injector with o-rings/seals, ONE (1) wireless EV6/Sumitomo Plug & Play Adapter.

• OUR ASPHALT-SERIES FUEL INJECTORS ARE RATED FOR GASOLINE, OXYGENATED (MTBE, ETHER) RACING FUEL OR ANY OF THE METHYL ALCOHOL (METHANOL) COMPOUNDS.

• Injectors shown with included 11 mm o-rings for fuel rail and 16 mm seals for the intake.

• Receive a complete flow-data sheet with each set of fuel injectors.

• Sample fit: 2002-2012 WRX, 2007-12 STI/LGT/Outback, 2009-12 FXT, Mitsu 4G69/4G64

This fuel injector set is part of our new "ASPHALT 2" series of 1200cc, 1600cc and 2000cc, flow-matched, high-flowing, super-street fuel injectors.

We sell a comparable flow-rated Denso EV6/EV14 fuel injector. We believe our injector to be a better choice for most modders and tuners.
Our injectors are custom-milled from brand new American-made fuel injector "cores" in large-quantity batches to achieve the highest quality product.
The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then hermetically-sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual dynamic and static flow rates at 3, 3.5, and 4 BAR at 25%, 50% and 100% for each injector, along with a complete dead time (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.

• These injectors incorporate a single-hole disc fuel delivery nozzle with a wide cone spray for excellent fuel atomization. 

• Use for all forced-air induction 4 cylinder engine

Injector Body Design: Metal and composite plastic
Flow rate:
We use the industry standard Heptane as our testing agent.
Notice we give a flow range. Each set has some variation - but never more than 1-1.5% within any one set.
1590-1610 cc/min at 3 bar

Easy tuning and low-end rpm and idle.
This fuel injector will function at rail pressures in excess of 101 PSI or 7 BAR.
Excellent low pulse width with predictable response down to 3 ms.
Excellent atomization for modern single and multi-valve engines.

Injector type: Saturated
Application: Super-street and racing, naturally- and forced-aspirated engines.
Fuel Delivery: Single-hole, modified disc
Electrical Connector: EV6, (USCAR)
Spray type: Wide cone, maximum atomization
Length: 2.5 inches, 64 mm
Diameter: 19 mm
Top Oring: 11 mm
Bottom seal: 16 mm
Resistance: 11.8-15.5 Ohms
Fuel types: All types of gasoline, methanol; E100, E85, E25, E10
We adhere to the latest technology and craftmanship techniques.

Fiveo's Exclusive Guarantee:
We stand behind all of our products with our 36 months/unlimited miles warranty.  If you are not 100% satisfied, we will refund your purchase price for returned fuel injectors in their original packaging.  If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector.  You pay only the shipping cost (some racing applications may void this warranty).

Fiveomotorsport has been a proven seller on eBay since we established in 2000, and we have received over 5000 Positive Feedback replies from satisfied customers.  We are fuel injector experts—email us with your questions.