50lbs/hr: EV14/LONG FUEL INJECTORS, SIX-HOLE FUEL NOZZLE

EV14/LONG FUEL INJECTOR WITH SIX-HOLES FUEL NOZZLE - MAXIMUM ATOMIZATION - WATCH VIDEO.
LIST PRICE INCLUDES:

1 - FUEL INJECTOR,

1 - EXTENDERS w/ fuel rail CLIP,

1 - 2-ENDED WIRELESS ELECTRICAL CONNECTOR

All-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then hermetically-sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintenance, but not essential, for stainless steel based fuel injectors.

High resistance, no inline resistors or resistor box required for use.

All New Generation Bosch EV14 fuel injectors will function at rail pressures in excess of 101 PSI, 7 bar.
Will maintain consistency to within 1%.

Excellent low pulse width response with predictable response down to 1.7 ms.

Excellent atomization for modern multi-valve engines.

This set will require no more than a 1% trim for easy tuning.

SPECIFICATIONS:
FIVEO P'N: 117US500X/WIRELESS
Body Design: EV14, Composite plastic w/internal filter
Injector type: Saturated
Fuel Nozzle: 6-hole disc - max atomization
Tested static flow rate: (All tests conducted using the industry standard Heptane).
515-530 cc/min, 50.5-51.4 lbs/hr at 43.5 psi. (3.0 bar)
(Video shows a still shot of our 30 second static test. The graduated cylinder is filled to 267.5 ml x 2 = 536cc/min
(Complete Static and Dynamic flow data tables are delivered with each set).
Sample Latency (Dead Time): 0.600 ms at 14 volts
(Complete Latency table showing values from 8-18 volts with each set).

DIMENSIONS:
Length: 2.9 inches, 72 mm
Diameter: 0.6 inches, 15.25 mm
O-rings: Viton, upper, lower, 14.5mm
Resistance: 12.7-13.1 Ohms

Electrical connector type: U.S. CAR (EV6)

Item Condition:
All of the Fiveomotorsport fuel injectors are shipped in brand-new condition unless otherwise stated as reconditioned or take-out injectors. All fuel injectors are covered by our warranty outlined below, unless otherwise stated.
Fiveo's Exclusive Warranty:
We stand behind all of our products with our 36 month/unlimited miles warranty. Within 7 days of your purchase date if you are not 100% satisfied, we will refund your purchase price for returned unused fuel injectors in their original packaging, minus shipping costs and up to a 15% restocking fee. If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector. You pay only the shipping costs. (Some racing applications may void this warranty).
Shipping and Handling Time:
All orders received by 2pm PST Monday-Friday will ship the same day. Orders received after 2pm on Friday will ship the following Monday. It is the buyer's responsibility to pay all customs fees, duties, import taxes, and related charges.
Average delivery times are listed below:
USPS priority mail – 3 business days
USPS Express International – 5 to 8 business days
FedEx Overnight
FedEx 2-Day