55lb, 580cc, EV1 Custom Fuel Injectors

Custom, Flow-Matched 55lb/hr, low-impedance Fuel Injectors

• This injector is a direct replacement for Siemens FI-11402, 3102

• Listed prices include a single (1) fuel injector
  

• Multiple injectors ordered are delivered in flow-matched sets

• Choose US/Euro Fit or Asian Import Fit (see menu options)
  

• Choose connector option (see menu)

Bosch/Siemens-type custom-manufactured and flow-matched Fiveo "Asphalt Series" high-performance, low-impedance fuel injectors.
Custom manufactured brand new, Japanese-made fuel injectors are tested in large-quantity batches to achieve the highest quality product.

• You receive fuel injectors ready to install in your modified engine

• US/Euro fit - 14mm upper o-ring and 14mm lower o-ring
• Asian Import fit - 11mm upper o-ring and 16mm lower seal

• All new Viton o-rings and seals included for installation.

FLOW CHART: delivered with a complete flow-data chart indicating individual dynamic and static flow rates at 3.0, 3.5, and 4.0 BAR at 15%, 50% and 100% duty-cycle for each injector, along with dead time (latency) table.  Flow matching was done with industry-standard equipment of the highest quality. The test was performed at varying temperatures to achieve realistic results.

Asphalt Series
Flow Rate: 580cc/min at 3.0 Bar; 55lb/hr at 43.5psi - 630cc/min at 3.5 BAR; 60lb/hr at 50.8 psi
Coil Resistance: 2.5 Ohms (low impedance)
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: 1.0 Amps
Latency (dead time): 0.700 ms at 14 volts - Complete latency table sent with each set of injectors.
Excellent atomization for medium compression, single- and multi-valve engines.
Injector Dimensions:
Overall length: 3 in./77 mm
O-ring to o-ring: 2.6 in./66 mm
Body Diameter: .95 in./24 mm

Will not require more than 1% trim
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)

Surface finish: green top, bodies are painted black to prevent oxidation.
Easy tuning and accurate compensations