42lbs/hr, 450cc/min Low Resistance, EV1 Fuel Injector, U.S. Fit

Custom mianufactured Fiveo "Asphalt Series" Low Impedance, 450cc/min fuel injector

• FIT: U.S. Domestic, European (EV1)
• List price includes a single (1) fuel injector with o-rings
• You receive a complete fuel injector - ready to install in your modified engine - complete with all Viton rubber 14.5 mm orings
• EV1 electrical connector included with each injector

FLOW CHART: delivered with complete flow-data chart indicating individual dynamic and static flow rates at 3.0, 3.5, and 4.0 BAR at 15%, 50% and 100% duty-cycle for each injector, along with a complete dead time (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
Testing is performed at varying temperatures to achieve realistic results.

This is a modified fuel injector. We custom manufacture brand new Japanese-made fuel injector cores in large-quantity batches to achieve the highest quality product.

Fitment: Import highly modified engines.

Flow Rate: 450cc/min at 43.5 PSI
Very fast pulse rates and dead times. (Complete data sent with each set).
Sample Dead time (offset): 0.455 ms at 14 volts

Minimum Pulse Width: 1.5 ms

Resistance: 2.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Amperage: 1.0 Amps

Excellent fuel atomization for medium compression, single-and multi-valve engines.

Will not require more than 1% trim

Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)

Surface finish: Green top, bodies are painted black to prevent oxidation.

Easy tuning and accurate compensations