380cc, 36lb, EV1, 12 OHMS, US/Euro

Custom, Flow-Matched Fuel Injectors - Use this injector as a direct replacement OE or upgrade.

• Price listed is for a single injector
• Multiple injectors ordered are delivered in flow-matched sets
• All new o-rings included for installation
• Tuning data included with matched sets

Use for US Domestic/European applications with 14.5 mm/0.57 in. seals for both upper and lower o-rings. 

Asphalt Series
Static Flow Rate: 380 cc/min at 43.5 PSI/3 Bar; 410 cc/min at 50 PSI/3.5 BAR
Coil Resistance: 12 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: 1.0 Amps

Excellent atomization for medium compression, single- and multi-valve engines.
Injector Dimensions:
Overall length: 3 in./77 mm
O-ring to o-ring: 2.6 in./66 mm
Diameter: .95 in./24 mm

Will not require more than 1% trim
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)

Surface finish: green top, bodies are black enamal.
Easy tuning and accurate compensations.