650cc Nissan CA18 RB20 RB26, Mitsubishi EVO 8/9

Brand New High Flowing, Flow-Matched Fuel Injector

Purchase single injectors for complete matched sets

• Flow Rate: 650 cc/min at 3 BAR
• Resistance: 12.5 Ohms
• Voltage: 8-15 Volts, Nominal 13.5 Volts
• Amperage: 1.0 Amps
• Pressure: Min. 36 PSI (2.5 bar), Max. 130 PSI (9 bar)
• All o-rings/seals Included for installation.

E85 Fuel usage - Because of the high-H2O levels, ethanol will not rust but tends to "dry" the orifices in stainless-steel constructed fuel injectors. Customers should beware that this can be a problem with some fuel injectors and may cause a "sticking" problem. Periodic lubrication is recommended if your engine will be left without starting/running for extended periods - weeks to months - at a time.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individually tested static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0, 4.0, and 5.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.