USE THIS INJECTOR FOR A HIGHLY MODIFIED ENGINE ONLY.
You are purchasing our newest technology, EV14, high-performance, 1000cc/min fuel injector.
- Use for highly modified K20 and K24 - 4 cylinder engines
- This is a custom engineered fuel injector. Complete with redesigned fuel-flow nozzles for maximum fuel atomization.
- Injectors are delivered complete with new orings, grommets and electrical adapters
- Dual-clip; USCAR/Keihin electrical adapters shown - INCLUDED - READY TO INSTALL
- Listed price is per injector
Our injectors are custom-manufactured from brand new American/German/Japanese-made fuel injector "cores" in large-quantity batches to achieve the highest quality product. The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then hermetically-sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.
FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintenance, but not essential, for stainless steel based fuel injectors.
Fitment: ACURA/Honda Integra 4 cylinder modified
(Engine codes: K20 and K24).
Flow Rates: (Actual flow rates may vary set to set but not more than 0.7-1.5%).
1000 cc/min at 43.5 PSI (3 BAR)
1090 cc/min at 50.8 PSI (3.5 BAR)
1180 cc/min at 58.0 PSI (4 BAR)
Resistance: 12.5 Ohms, high resistance
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: 1.0 Amps
Dead Time: 0.75 ms at 14 volts
Excellent atomization for medium compression, single-and multi-valve engines.
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
Surface finish: Black composite
Easy tuning and accurate compensations.
All O-rings Included for installation.
All of the Fiveomotorsport fuel injectors are shipped in brand-new condition unless otherwise stated as reconditioned or take-out injectors. All fuel injectors are covered by our warranty outlined below, unless otherwise stated.
Fiveo's Exclusive Warranty:
We stand behind all of our products with our 36 month/unlimited miles warranty. If you are not 100% satisfied, we will refund your purchase price for returned unused fuel injectors in their original packaging, minus shipping costs and up to a 15% restocking fee. If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector. You pay only the shipping costs. (Some racing applications may void this warranty).
Shipping and Handling Time:
All orders received by 2pm PST Monday-Friday will ship the same day. Orders received after 2pm on Friday will ship the following Monday.
Average delivery times are listed below:
USPS priority mail – 3 business days
USPS Express International – 5-8 business days
Honda K Series Read Less