Use for US and European applications with 14.5 mm fuel rail and intake manifold.
Use for Asian Import "Long" applications with 11 mm fuel rail bore and 16 mm seals on the intake manifold.
- Price listed is each (1) injector, injector/pigtail.
- Multiple injectors delivered in flow-matched sets
- All O-rings Included for installation
- Low impedance (low resistance) fuel injectors
- EV1 Bosch-type electrical connector pigtails included.
Our injectors are custom-manufactured from brand new American-made fuel injector "blanks" in large-quantity batches to achieve the highest quality product. The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then hermetically-sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.
FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintenance, but not essential, for stainless steel based fuel injectors.
Fiveo Asphalt Series
Flow Rate: 680cc/min at 3 BAR
Fuel Nozzle: Single-pintle
Coil Resistance: 2.5 - 3.2 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Amperage: 1.0 Amps
Minimum Pulse width: 1.5-1.8 ms
Excellent high recovery times.
Excellent atomization for medium compression, single-and multi-valve engines.
Will not require more than 1% trim
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
Surface finish: green top, bodies; black enamel .
Easy tuning and accurate compensations.
All of the Fiveomotorsport fuel injectors are shipped in brand-new condition unless otherwise stated as reconditioned or take-out injectors. All fuel injectors are covered by our warranty outlined below, unless otherwise stated.
Fiveo's Exclusive Warranty:
We stand behind all of our products with our 36 month/unlimited miles warranty. Within 14 days of your purchase date if you are not 100% satisfied, we will refund your purchase price for returned unused fuel injectors in their original packaging, minus shipping costs and up to a 15% restocking fee. If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector. You pay only the shipping costs. (Some racing applications may void this warranty).
Shipping and Handling Time:
All orders received by 2pm PST Monday-Friday will ship the same day. Orders received after 2pm on Friday will ship the following Monday. It is the buyer's responsibility to pay all customs fees, duties, import taxes, and related charges.
Average delivery times are listed below:
USPS priority mail – 3 business days
USPS Express International – 5 to 8 business days
Sport Compact, Evo VIII/IX