Original Equipment P/N:
16600-5L700
16600-2Y915
16600-AE060

You are purchasing a set of OEM original equipment Nissan/Infiniti fuel injectors.

Nissan 350Z

Nissan Maxima

Nissan Pathfinder

Infiniti G20

Infiniti I30

Infiniti G35/G37

Infiniti Q45

Part number list:

166002Y915

166005L700

16600CD700

166002Y905

16611AA350

These sets are refurbished with our new-parts 3 Year/Unlimited Miles Warranty.

Use this injector for modified engines only. Will fit stock fuel rail/intake/electrical connection - Hyundai, 350Z, etc. that use the 14mm orings.

You are puchasing an exclusive set of brand new and flow matched Bosch EV14 650cc fuel injectors for modified engines.

Priced right at $77.50 each.

Guaranteed usage for superstreet and racing applications.

Plug 'n' tune!

No adapters, No wiring issues, no soldering.

Bosch fuel injectors - flow-matched, high performance fuel injectors.

Use with stock rail, stock electrical harness, and stock intake - with highly modified engine four, six cylinder

Manufacturer flow rates do vary slightly from set to set.

You get a custom flow matched set that will not vary more than 1% or less than 10cc across the set.

But the most important statistic is the pulsed-flow rate on this set of injectors is nearly perfect.

Injector type: EV14, saturated

Electrcial connector: Sumitomo (Denso)

650cc/min at 43.5 PSI (3 BAR)

Latency (Dead Time): 0.75 at 14 volts

Tested Resistance: 12.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Amperage: 1.0 Amps

Pressure: Min. 36 PSI (2.5 bar), Max. 130 PSI (9 bar)

Excellent fuel atomization - Excellent linearity

Low end pulse width accurate to within 1% down to 2ms.

This Bosch injector will not require more than 1% trim

Surface finish: black composite

All 14mm Viton O-rings Included for installation.

SPECIAL NOTE to our customers:

All orings are supplied for installation.

This injector is sold with a money back guarantee.

If you are not 100% satisfied we will refund your purchase price for returned fuel injectors in their original packaging. You pay only the shipping cost.

(All fuel injector specifications meet or exceed the manufacturer's specification standard).

Buy from a seller you can trust.

Buy from a proven ebay seller.

Fiveomotorsport has been a Power Seller on ebay since 2000 with over 4400 Positive Feedbacks.

We are fuel injector experts - email with your questions.

All injector sets are sold with our 36 Months/Unlimited Miles Warranty.

(Note: Some racing applications may void this warranty).

You are puchasing a set of Denso 2000cc, high resistance, high performance fuel inejctors.

Note: This set is sold withouit electrical connectors or length extenders. Extender, 12.5mm and EV6/USCAR pigtails sold separtately. See additional listings.

Fiveomotorsport "Asphalt II" fuel injectors for domestic/import car and truck engines.

This Fiveo injector is part of our new "ASPHALT" series of new generation, flow matched, superstreet and racing fuel injectors.

All sets come with a flow DATA SHEET

The injectors incorporate a single modified-pintle fuel delivery nozzle with a wide cone spray for excellent fuel atomization.

Use for all forced-air and naturally aspirated induction engines.

SPECIAL NOTE to our customers: This is a flow matched set of Fiveo fuel injectors. Viton 14mm orings are supplied for installation.

This injector set is sold with a money back guarantee. If you are not 100% satisfied we will exchange or refund your purchase price for returned, unused and uninstalled fuel injectors. You pay only the shipping.

Injector Body Design: Metal and composite plastic

Flow rates: Listed at 80% duty cycle

All sets are flow matched to within 0.7 to 1.0%

(These are true and tested flow rates of this individual set of 4 fuel injectors).

We use the industry standard Heptane as our testing agent.

TESTED FLOW RATES:

190 lbs/hr, 2000 cc/min at (3.5 bar)

197 lbs/hr, 2170 cc/min at (4 bar)

225 lbs/hr, 2400 cc/min at (5 bar)

Dead Time: 1.15ms at 14 Volts

This Fiveo injector will function at rail pressures in excess of 130psi, 9 bar.

Excellent low pulse width response with predictable response down to 2ms.

Excellent atomization for modern multi-valve engines.

Injector type: New generation EV6

Application: Super-street and racing, natually- and forced-aspirated engines.

Fuel Delivery: Single-hole, modified disc

Electrical Connector: EV6, (Minitimer)

Spray type: wide cone, maximum atomization

Length: 2.5 inches, 64 mm

Diameter: 16 mm

Top Oring: Viton 14.5 mm

Bottom Oring: Viton 14.5 mm

Resistance: 11.8-15.5 Ohms - No inline resistors are required.

Fuel types: All types gasoline, Methanol, E85, E25, E10