Bosch, EV14, 1000cc, 1200cc, STANDARD-2.5 inch

Genuine Bosch EV14 fuel injectors available in 1000 cc/min and 1200 cc/min

• Listed price is for a single (1) fuel injector
• Purchasing a matched set guarantees a unique flow chart with test data and latency values included

FLOW CHART: Each flow-matched set is sold with a complete and unique flow-data chart indicating individually tested static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

• Fuel injectors have been tested and will function at rail pressures in excess of 116 psi, 8 bar.
• Low pulse-width balancing with predictable response
• Excellent fuel atomization for modern multi-valve engines.
• This set will require no more than a 1% trim for easy tuning.
• Injector type: EV-14, saturated
• Fuel Nozzle: Single-hole disc, with diffuser plate - Maximum atomization.
• Total Length: 2.50 inches, 65.5 mm
• Fits Iridium fuel rail
• O-rings: Viton, top and bottom, 14.5 mm
• Resistance: 12.5 Ohms (high impedance, no inline resistors or resistor box requires for use)
• Stainless steel construction, rated ALL-fuels